J. Price, C. L. Jones, L. Hipwood, C. Shaw, P. Abbot, C. Maxey, H. W. Lau, J. Fitzmaurice, R. Catchpole, M. Ordish, P. Thorne, H. Weller, R. Mistry, K. Hoade, A. Bradford, D. Owton, P. Knowles
{"title":"Dual-Band MW/LW IRFPAs made from HgCdTe grown by MOVPE","authors":"J. Price, C. L. Jones, L. Hipwood, C. Shaw, P. Abbot, C. Maxey, H. W. Lau, J. Fitzmaurice, R. Catchpole, M. Ordish, P. Thorne, H. Weller, R. Mistry, K. Hoade, A. Bradford, D. Owton, P. Knowles","doi":"10.1117/12.784483","DOIUrl":null,"url":null,"abstract":"This paper describes the design, fabrication and performance of dual-band MW/LW infrared detectors made from HgCdTe (MCT) grown by Metal Organic Vapour Phase Epitaxy (MOVPE). The detectors are staring, focal plane arrays consisting of HgCdTe mesa-diode arrays bump bonded to silicon read-out circuits. Each mesa has one connection to the ROIC and the bands are selected by varying the applied bias. Arrays of 320x256 pixels on a 30 μm pitch have performed exceedingly well. For example, arrays with a cut-off wavelength of 5 μm in the MW (mid-wave) band and 10 μm in the LW (long-wave) band have median NETDs of 10 and 17 mK and defect levels of 0.3% and 0.05%, in the MW and LW bands respectively. Interestingly the LW defect level is often lower than the MW defect level and the defects are not correlated; i.e. a pixel that is defective in the MW band is usually not defective in the LW band. Arrays of 640x512 pixels on a 24 μm pitch have been developed. These use a read-out integrated circuit (ROIC) that has two capacitors per pixel and the ability to switch bands during a frame giving quasi-simultaneous images. The performance of these arrays has been excellent with NETDs of 14mK in the MW band and 23mK in the LW band. Dual band-pass filters have been designed and built into a detector.","PeriodicalId":133868,"journal":{"name":"SPIE Defense + Commercial Sensing","volume":"86 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2008-05-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"17","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"SPIE Defense + Commercial Sensing","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1117/12.784483","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 17
Abstract
This paper describes the design, fabrication and performance of dual-band MW/LW infrared detectors made from HgCdTe (MCT) grown by Metal Organic Vapour Phase Epitaxy (MOVPE). The detectors are staring, focal plane arrays consisting of HgCdTe mesa-diode arrays bump bonded to silicon read-out circuits. Each mesa has one connection to the ROIC and the bands are selected by varying the applied bias. Arrays of 320x256 pixels on a 30 μm pitch have performed exceedingly well. For example, arrays with a cut-off wavelength of 5 μm in the MW (mid-wave) band and 10 μm in the LW (long-wave) band have median NETDs of 10 and 17 mK and defect levels of 0.3% and 0.05%, in the MW and LW bands respectively. Interestingly the LW defect level is often lower than the MW defect level and the defects are not correlated; i.e. a pixel that is defective in the MW band is usually not defective in the LW band. Arrays of 640x512 pixels on a 24 μm pitch have been developed. These use a read-out integrated circuit (ROIC) that has two capacitors per pixel and the ability to switch bands during a frame giving quasi-simultaneous images. The performance of these arrays has been excellent with NETDs of 14mK in the MW band and 23mK in the LW band. Dual band-pass filters have been designed and built into a detector.