{"title":"Combined tapered resistive and inductive loading to increase the bandwidth of small antennas","authors":"L. Little, O. Ramahi, R. Mittra","doi":"10.1109/APS.1992.221455","DOIUrl":null,"url":null,"abstract":"A loading technique that combines both resistive and inductive tapered loadings to improve the efficiency of the monopole and yet maintain uniform nonresonant impedance characteristics which makes a good impedance match possible, is introduced. In order to increase the radiating power and thus the efficiency of the resistively tapered monopole, tapered inductive loading is employed primarily to counteract the high capacitive reactance at the lower end of the frequency band and thus increase the radiating power of the antenna. Several profiles for the inductive loading were tested and were found to give, depending on the load, an improvement in the radiation power of the antenna. However, only one among the different loading profiles used was able to increase the efficiency and yet maintain very favorable broadband matching characteristics.<<ETX>>","PeriodicalId":289865,"journal":{"name":"IEEE Antennas and Propagation Society International Symposium 1992 Digest","volume":"95 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1992-06-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"6","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE Antennas and Propagation Society International Symposium 1992 Digest","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/APS.1992.221455","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 6
Abstract
A loading technique that combines both resistive and inductive tapered loadings to improve the efficiency of the monopole and yet maintain uniform nonresonant impedance characteristics which makes a good impedance match possible, is introduced. In order to increase the radiating power and thus the efficiency of the resistively tapered monopole, tapered inductive loading is employed primarily to counteract the high capacitive reactance at the lower end of the frequency band and thus increase the radiating power of the antenna. Several profiles for the inductive loading were tested and were found to give, depending on the load, an improvement in the radiation power of the antenna. However, only one among the different loading profiles used was able to increase the efficiency and yet maintain very favorable broadband matching characteristics.<>