Microscopic Wear Analysis of Indexable Inserts after Machining of 34CrNiMo6 Steel

IF 1.6 Q4 ENGINEERING, MANUFACTURING Manufacturing Technology Pub Date : 2023-11-14 DOI:10.21062/mft.2023.077
Nataša Náprstková, Karel Šramhauser, Iryna Hren, Jan Novotný, Jan Sviantek
{"title":"Microscopic Wear Analysis of Indexable Inserts after Machining of 34CrNiMo6 Steel","authors":"Nataša Náprstková, Karel Šramhauser, Iryna Hren, Jan Novotný, Jan Sviantek","doi":"10.21062/mft.2023.077","DOIUrl":null,"url":null,"abstract":"Machining is an important part of the manufacturing process in the engineering field. Turning is one of these areas. At present, almost exclusively exchangeable cutting inserts are used in production machining. The article describes the research in the field of their wear, where the electron microscopy was used to evaluate the results. Electron microscopy is a very important aid in research in many are-as not only of human activity and also is the important aid in the field of mechanical engineering and manufacturing technologies. The results thus obtained can make in a given area it clearer and better document the resulting situation. Within the experiments, selected cutting inserts were used and the given material was machined. The electron microscope Tescan Vega 3, which is available at the workplace where the experiment was conducted, was used to evaluate the resulting wear. In the frame of experiments was also performed the composition analyze of used cutting inserts. Analyzes of the machined material were also performed to confirm the declarations from the supplier.","PeriodicalId":38629,"journal":{"name":"Manufacturing Technology","volume":null,"pages":null},"PeriodicalIF":1.6000,"publicationDate":"2023-11-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Manufacturing Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.21062/mft.2023.077","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, MANUFACTURING","Score":null,"Total":0}
引用次数: 1

Abstract

Machining is an important part of the manufacturing process in the engineering field. Turning is one of these areas. At present, almost exclusively exchangeable cutting inserts are used in production machining. The article describes the research in the field of their wear, where the electron microscopy was used to evaluate the results. Electron microscopy is a very important aid in research in many are-as not only of human activity and also is the important aid in the field of mechanical engineering and manufacturing technologies. The results thus obtained can make in a given area it clearer and better document the resulting situation. Within the experiments, selected cutting inserts were used and the given material was machined. The electron microscope Tescan Vega 3, which is available at the workplace where the experiment was conducted, was used to evaluate the resulting wear. In the frame of experiments was also performed the composition analyze of used cutting inserts. Analyzes of the machined material were also performed to confirm the declarations from the supplier.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
34CrNiMo6钢可转位刀片加工后的显微磨损分析
机械加工是工程领域制造过程的重要组成部分。转弯就是其中之一。目前,在生产加工中几乎只使用可交换的切削刀片。本文介绍了在其磨损领域的研究,其中使用电子显微镜对结果进行了评价。电子显微镜不仅是研究人类活动的重要工具,也是机械工程和制造技术领域的重要工具。这样得到的结果可以使给定区域的结果情况更清楚、更好地记录下来。在实验中,使用选定的切削刀片,并对给定的材料进行加工。Tescan Vega 3电子显微镜(在实验进行的工作场所可以买到)被用来评估由此产生的磨损。在试验框架内,对使用过的切削刀片进行了成分分析。还对加工材料进行了分析,以确认供应商的声明。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Manufacturing Technology
Manufacturing Technology Engineering-Industrial and Manufacturing Engineering
CiteScore
2.10
自引率
44.40%
发文量
65
期刊最新文献
Mechanical Properties and Compression Performance of 3D Printed HIPS Polymer Lattice Structure Static and Modal Analysis of the Wheel-side Reducer Cover Plate Based on ANSYS Development and Simulation of a Hybrid Extrusion Mechanism for Enhanced Surface Quality and Precision in FDM 3D Printing Analysis and Experimental Verification of Human-Robot Coupling Collaboration Characteristics for Lower Extremity Exoskeleton Rehabilitation Robot Based on ADAMS Proposal for Evaluating the Efficiency of Production Processes Using External and Internal Key Performance Indicators
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1