Multi-objective robustness indicators for evaluation and exploration of design margins

IF 2.5 2区 工程技术 Q1 ENGINEERING, MULTIDISCIPLINARY Journal of Engineering Design Pub Date : 2023-09-26 DOI:10.1080/09544828.2023.2261336
Herle Kjemtrup Juul-Nyholm, Tobias Eifler
{"title":"Multi-objective robustness indicators for evaluation and exploration of design margins","authors":"Herle Kjemtrup Juul-Nyholm, Tobias Eifler","doi":"10.1080/09544828.2023.2261336","DOIUrl":null,"url":null,"abstract":"AbstractSpecification of design margins serves the purpose of mitigating the ubiquitous uncertainty of the engineering design process. This paper addresses the twofold challenge of establishing a suitable concept of margins early in the design process, before the design is mature enough for detailed modelling, and evaluating margin inter-dependencies. As margins are often specified in an unstructured manner, there is a risk that one margin might lead to a need for more margins, e.g. tight tolerances, downstream.To avoid adverse margin dependencies, five Multi-Objective Robustness Indicators based on multi-objective design exploration are presented: The Relative Utopia Index, the Relative Pareto Shape Index, the Relative Compromise Index, the Relative Average Sensitivity Index, and the Average Feasible Variable Range. They aggregate optimality, trade-offs and sensitivity of design configurations. The indicators are applied to a case example, a flat head tank design, to illustrate the effect and inter-dependency of margin specification.Three margin types were identified. The first type affects only the Objective Space size, the second type affects only the Pareto set size and the third type affects Pareto set shape. The third margin type is the most critical as it leads to harder compromises between design objectives later in the design process.KEYWORDS: Design marginsRobust designMulti-objective optimisation AcknowledgementThe authors would like to thank Novo Nordisk for financial support to the DTU-NN Robust Design program.Disclosure statementNo potential conflict of interest was reported by the author(s).Notes1 For a detailed overview of the calculation of mean effective functions fjeff(x). we refer to (Deb and Gupta Citation2006).2 Further work in the area of systematic trade-off mitigation is presented by Sigurdarson et al. (Citation2022a, Citation2022b).Additional informationFundingThis work was supported by Novo Nordisk.","PeriodicalId":50207,"journal":{"name":"Journal of Engineering Design","volume":"57 1","pages":"0"},"PeriodicalIF":2.5000,"publicationDate":"2023-09-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Engineering Design","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1080/09544828.2023.2261336","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

AbstractSpecification of design margins serves the purpose of mitigating the ubiquitous uncertainty of the engineering design process. This paper addresses the twofold challenge of establishing a suitable concept of margins early in the design process, before the design is mature enough for detailed modelling, and evaluating margin inter-dependencies. As margins are often specified in an unstructured manner, there is a risk that one margin might lead to a need for more margins, e.g. tight tolerances, downstream.To avoid adverse margin dependencies, five Multi-Objective Robustness Indicators based on multi-objective design exploration are presented: The Relative Utopia Index, the Relative Pareto Shape Index, the Relative Compromise Index, the Relative Average Sensitivity Index, and the Average Feasible Variable Range. They aggregate optimality, trade-offs and sensitivity of design configurations. The indicators are applied to a case example, a flat head tank design, to illustrate the effect and inter-dependency of margin specification.Three margin types were identified. The first type affects only the Objective Space size, the second type affects only the Pareto set size and the third type affects Pareto set shape. The third margin type is the most critical as it leads to harder compromises between design objectives later in the design process.KEYWORDS: Design marginsRobust designMulti-objective optimisation AcknowledgementThe authors would like to thank Novo Nordisk for financial support to the DTU-NN Robust Design program.Disclosure statementNo potential conflict of interest was reported by the author(s).Notes1 For a detailed overview of the calculation of mean effective functions fjeff(x). we refer to (Deb and Gupta Citation2006).2 Further work in the area of systematic trade-off mitigation is presented by Sigurdarson et al. (Citation2022a, Citation2022b).Additional informationFundingThis work was supported by Novo Nordisk.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
设计余量评价与探索的多目标稳健性指标
摘要设计余量的确定是为了减轻工程设计过程中普遍存在的不确定性。本文解决了两方面的挑战:在设计过程的早期,在设计成熟到足以进行详细建模之前,建立一个合适的边际概念,并评估边际相互依赖性。由于保证金通常以非结构化的方式指定,因此存在一个保证金可能导致需要更多保证金的风险,例如下游的严格公差。为了避免不利的边际依赖,提出了基于多目标设计探索的5个多目标鲁棒性指标:相对乌托邦指数、相对帕累托形状指数、相对妥协指数、相对平均敏感性指数和平均可行变量范围。它们集合了设计配置的最优性、权衡和敏感性。这些指标被应用到一个案例,一个平头坦克设计,以说明影响和相互依赖的余量规格。确定了三种边缘类型。第一种类型只影响目标空间大小,第二种类型只影响帕累托集合大小,第三种类型影响帕累托集合形状。第三种边距类型是最关键的,因为它会导致在设计过程后期更难在设计目标之间做出妥协。关键词:设计余量稳健设计多目标优化作者感谢诺和诺德对DTU-NN稳健设计项目的财政支持。披露声明作者未报告潜在的利益冲突。注1关于平均有效函数计算的详细概述fjeff(x)。我们参考(Deb and Gupta Citation2006)Sigurdarson等人(Citation2022a, Citation2022b)介绍了系统性权衡缓解领域的进一步工作。本研究得到了诺和诺德的支持。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Journal of Engineering Design
Journal of Engineering Design 工程技术-工程:综合
CiteScore
5.00
自引率
33.30%
发文量
18
审稿时长
4.5 months
期刊介绍: The Journal of Engineering Design is a leading international publication that provides an essential forum for dialogue on important issues across all disciplines and aspects of the design of engineered products and systems. The Journal publishes pioneering, contemporary, best industrial practice as well as authoritative research, studies and review papers on the underlying principles of design, its management, practice, techniques and methodologies, rather than specific domain applications. We welcome papers that examine the following topics: Engineering design aesthetics, style and form- Big data analytics in engineering design- Collaborative design in engineering- Engineering concept design- Creativity and innovation in engineering- Engineering design architectures- Design costing in engineering Design education and pedagogy in engineering- Engineering design for X, e.g. manufacturability, assembly, environment, sustainability- Engineering design management- Design risk and uncertainty in engineering- Engineering design theory and methodology- Designing product platforms, modularity and reuse in engineering- Emotive design, e.g. Kansei engineering- Ergonomics, styling and the design process- Evolutionary design activity in engineering (product improvement & refinement)- Global and distributed engineering design- Inclusive design and assistive engineering technology- Engineering industrial design and total design- Integrated engineering design development- Knowledge and information management in engineering- Engineering maintainability, sustainability, safety and standards- Multi, inter and trans disciplinary engineering design- New engineering product design and development- Engineering product introduction process[...]
期刊最新文献
Integrating GRA with intuitionistic fuzzy VIKOR model to explore attractive design solution of wickerwork cultural and creative products Modularity and new product performance: the role of new product development speed and task uncertainty Reconciling platform vs. product optimisation by value-based margins on solutions and parameters Smart industrial information integration: a lightweight privacy protection model in an intelligent manufacturing architecture Lumos: AI-driven prompt optimisation tool for assisting conceptual design
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1