Economic particulate transport performance analysis of k-epsilon models in highly concentrated slurry through pipelines

IF 2.3 4区 工程技术 Q3 ENGINEERING, CHEMICAL Particulate Science and Technology Pub Date : 2023-11-11 DOI:10.1080/02726351.2023.2278051
Yatindra Kumar, D. R. Kaushal
{"title":"Economic particulate transport performance analysis of k-epsilon models in highly concentrated slurry through pipelines","authors":"Yatindra Kumar, D. R. Kaushal","doi":"10.1080/02726351.2023.2278051","DOIUrl":null,"url":null,"abstract":"AbstractThe paper analyzed the economic transporting performance of k-epsilon turbulence models using the Eulerian two-fluid approach in transporting highly concentrated fine particulate slurry through horizontal pipelines using Kaushal et al. (Citation2005) experimental data of glass beads slurry of 125 μm mean diameter for volumetric concentration ranging 30%–52% and flow velocity ranging 2–5 m/s. The primary components of economical slurry transport are Specific Energy consumption (SEC) and pressure drop; both have been examined in the performance of different κ-ϵ models and are yet to be unlighted on these parameters. The CFD model found the excellent performance of all k-epsilon models with slightly more effectiveness in the case of the Realizable κ-ϵ model. The analyzed and validated CFD model was subsequently used in examining the parameters of slurry flow, such as the secondary phase velocity, concentration distribution, and SEC analysis for the range of fine particles 125, 150, and 212 µm. The plotted contours from CFD are useful in visualizing slurry flow parameters at intermediates inlet values for slurry inlet flow velocity ranging 2–6 m/s and inlet volumetric concentration ranging 30%–55% for fine particles. Analysis revealed that the highly concentrated fine particles slurry transported at optimum volumetric concentration range of 40–45% are economical slurry transport.Keywords: Eulerian multiphase modelhigh concentrated slurrysolid concentrationspecific energy consumption (SEC)turbulence models AcknowledgmentThe first author is highly grateful to Punjab Engineering College (Deemed to be University) Chandigarh, India, for sponsoring his doctoral studies at the Indian Institute of Technology Delhi. The authors are highly grateful to the Indian Institute of Technology Delhi for providing the required research facilities for the study.Disclosure statementThe authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.","PeriodicalId":19742,"journal":{"name":"Particulate Science and Technology","volume":"12 6","pages":"0"},"PeriodicalIF":2.3000,"publicationDate":"2023-11-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Particulate Science and Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1080/02726351.2023.2278051","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

Abstract

AbstractThe paper analyzed the economic transporting performance of k-epsilon turbulence models using the Eulerian two-fluid approach in transporting highly concentrated fine particulate slurry through horizontal pipelines using Kaushal et al. (Citation2005) experimental data of glass beads slurry of 125 μm mean diameter for volumetric concentration ranging 30%–52% and flow velocity ranging 2–5 m/s. The primary components of economical slurry transport are Specific Energy consumption (SEC) and pressure drop; both have been examined in the performance of different κ-ϵ models and are yet to be unlighted on these parameters. The CFD model found the excellent performance of all k-epsilon models with slightly more effectiveness in the case of the Realizable κ-ϵ model. The analyzed and validated CFD model was subsequently used in examining the parameters of slurry flow, such as the secondary phase velocity, concentration distribution, and SEC analysis for the range of fine particles 125, 150, and 212 µm. The plotted contours from CFD are useful in visualizing slurry flow parameters at intermediates inlet values for slurry inlet flow velocity ranging 2–6 m/s and inlet volumetric concentration ranging 30%–55% for fine particles. Analysis revealed that the highly concentrated fine particles slurry transported at optimum volumetric concentration range of 40–45% are economical slurry transport.Keywords: Eulerian multiphase modelhigh concentrated slurrysolid concentrationspecific energy consumption (SEC)turbulence models AcknowledgmentThe first author is highly grateful to Punjab Engineering College (Deemed to be University) Chandigarh, India, for sponsoring his doctoral studies at the Indian Institute of Technology Delhi. The authors are highly grateful to the Indian Institute of Technology Delhi for providing the required research facilities for the study.Disclosure statementThe authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
高浓度浆体管道中k-epsilon模型颗粒输运经济性分析
摘要本文利用Kaushal等(Citation2005)在体积浓度为30% ~ 52%、流速为2 ~ 5 m/s、平均直径为125 μm的玻璃微珠浆体的实验数据,采用欧拉双流体方法分析了k-epsilon湍流模型在水平管道输送高浓度细颗粒浆体时的经济输运性能。经济输送浆体的主要组成部分是比能耗(SEC)和压降;两者都在不同的κ- ε模型的性能中进行了检验,但尚未阐明这些参数。CFD模型发现所有k-epsilon模型都具有优异的性能,而Realizable κ- ε模型的有效性略高。分析和验证的CFD模型随后用于检测浆液流动参数,如二次相速度、浓度分布以及细颗粒125、150和212µm范围内的SEC分析。计算流体动力学绘制的等高线可用于显示中间介质时的浆体流动参数,当浆体进口流速为2 - 6m /s,细颗粒的进口体积浓度为30%-55%时。分析表明,在40 ~ 45%的最佳体积浓度范围内输送高浓度细颗粒浆料是经济的浆料输送方式。本文第一作者非常感谢印度昌迪加尔旁遮普工程学院(被认为是大学)资助他在德里印度理工学院进行博士研究。作者非常感谢印度理工学院德里分校为这项研究提供了所需的研究设施。披露声明作者声明,他们没有已知的竞争经济利益或个人关系,可能会影响本文所报道的工作。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Particulate Science and Technology
Particulate Science and Technology 工程技术-工程:化工
CiteScore
4.40
自引率
4.00%
发文量
86
审稿时长
12 months
期刊介绍: Particulate Science and Technology, an interdisciplinary journal, publishes papers on both fundamental and applied science and technology related to particles and particle systems in size scales from nanometers to millimeters. The journal''s primary focus is to report emerging technologies and advances in different fields of engineering, energy, biomaterials, and pharmaceutical science involving particles, and to bring institutional researchers closer to professionals in industries. Particulate Science and Technology invites articles reporting original contributions and review papers, in particular critical reviews, that are relevant and timely to the emerging and growing fields of particle and powder technology.
期刊最新文献
Tribo-performance analysis of HVOF sprayed Colmonoy-88 using the Taguchi method Preparation of Au-MoS2 photocatalyst with a green synthesis method and its application in water contaminant degradation Effect of ash-bridge deposition in asymmetric diesel particulate filter channels on the pressure drop and particulate matter trapping characteristics The effects of processing parameters on the shape of particle size distribution and grinding rate in a stirred mill Synergic fabrication of gold – iron oxide magnetic nanohybrids as a potential agent for thermosensitizing and magnetic resonance-high intensity focused ultrasound (mr-HIFU) treatment in uterine myomas
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1