Strategies to improve the thermal performance of solar collectors

Abstract

Abstract The paper evaluates a passive method for heat transfer improvement in heat exchangers, which implies the use of nanofluids. All calculations were carried out with a constant volumetric flow rate. The study examines three fluids with 0–4 % volume concentrations of CuO, MgO, and Al 2 O 3 particles. The results indicate an increase in the heat transfer coefficient with increasing temperature. An Al 2 O 3 nanofluid (4 % concentration) contributed to the best thermal performance. The incorporation of a 4 % content of MgO yielded an augmentation in heat transfer ranging from 15 % to 22 %, whereas an analogous concentration of CuO led to a more substantial enhancement of 25 %. Notably, the introduction of nanoparticles of Al 2 O 3 produces a remarkable augmentation in heat transfer performance, with potential improvements of up to 36 %. The Nusselt number increases with increasing particle volume fraction and Reynolds number, according to results obtained for several nanoparticles (Al 2 O 3 , CuO, SiO 2 , and ZnO) with volume percentages in the range of 1–4 % and nanoparticle diameters of 25–70 nm. For all nanofluids, the time-averaged Nusselt number rises with a solid phase volume fraction increase of less than 5 %.