Poisson’s ratio of granular materials for Mohr-Coulomb elastoplastic model

IF 2.7 3区 工程技术 Q3 ENVIRONMENTAL SCIENCES International Journal of Mining Reclamation and Environment Pub Date : 2023-10-23 DOI:10.1080/17480930.2023.2260589
Chuan Fan, Pengyu Yang, Li Li, Ruofan Wang, Guangsheng Liu, Xiaocong Yang, Weidong Song, Lijie Guo
{"title":"Poisson’s ratio of granular materials for Mohr-Coulomb elastoplastic model","authors":"Chuan Fan, Pengyu Yang, Li Li, Ruofan Wang, Guangsheng Liu, Xiaocong Yang, Weidong Song, Lijie Guo","doi":"10.1080/17480930.2023.2260589","DOIUrl":null,"url":null,"abstract":"ABSTRACTThe Mohr-Coulomb elastoplastic model is extensively employed in geotechnical engineering. Despite the well-known nonlinear behaviour of granular cohesionless materials under a wide range of normal stress or confining pressure, the Mohr-Coulomb elastoplastic model continues to be largely used in geotechnical engineering, due to its simplicity and large availability in numerous commercialised software. Its application requires the input of a key parameter, named Poisson’s ratio. It is however a big challenge as its value changes with axial strain and confining pressure. In this study, the optimal Poisson’s ratio of granular materials for the Mohr-Coulomb elastoplastic model is determined by reproducing the experimental results of stress-strain relationships through numerical modelling with the Mohr-Coulomb elastoplastic model. The results show that the Poisson’s ratio μ0.02, corresponding to the slope of the volumetric strain against axial strain curve at 2% of the peak deviatoric stress can be used in numerical modelling with the Mohr-Coulomb elastoplastic model as long as the granular material does not exhibit dilation behaviour. When the material exhibits dilation behaviour, the Poisson’s ratio μ0.36, corresponding to the slope of the volumetric strain against axial strain curve at 36% of the peak deviatoric stress, seems to be appropriate in numerical modelling with the Mohr-Coulomb elastoplastic model. In addition, the study also shows that the Mohr-Coulomb elastoplastic model can be used to simulate mechanical behaviour of granular material under small strain, but not appropriate under large strain conditions.KEYWORDS: Mohr-Coulomb modelPoisson’s ratiogranular materialscohesionless sandstriaxial compression testnumerical modellingstability and reliability of numerical modelling Disclosure statementNo potential conflict of interest was reported by the author(s).Additional informationFundingThe work was supported by the Young Scientist Project of the National Key Research and Development Program of China [No. 2021YFC2900600]; Beijing Nova Program [No. 20220484057]; China Scholarship Council [No. 202010300001]; Natural Sciences and Engineering Research Council of Canada [RGPIN-2018-06902 and ALLRP 566888-21].","PeriodicalId":49180,"journal":{"name":"International Journal of Mining Reclamation and Environment","volume":null,"pages":null},"PeriodicalIF":2.7000,"publicationDate":"2023-10-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Mining Reclamation and Environment","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1080/17480930.2023.2260589","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENVIRONMENTAL SCIENCES","Score":null,"Total":0}
引用次数: 0

Abstract

ABSTRACTThe Mohr-Coulomb elastoplastic model is extensively employed in geotechnical engineering. Despite the well-known nonlinear behaviour of granular cohesionless materials under a wide range of normal stress or confining pressure, the Mohr-Coulomb elastoplastic model continues to be largely used in geotechnical engineering, due to its simplicity and large availability in numerous commercialised software. Its application requires the input of a key parameter, named Poisson’s ratio. It is however a big challenge as its value changes with axial strain and confining pressure. In this study, the optimal Poisson’s ratio of granular materials for the Mohr-Coulomb elastoplastic model is determined by reproducing the experimental results of stress-strain relationships through numerical modelling with the Mohr-Coulomb elastoplastic model. The results show that the Poisson’s ratio μ0.02, corresponding to the slope of the volumetric strain against axial strain curve at 2% of the peak deviatoric stress can be used in numerical modelling with the Mohr-Coulomb elastoplastic model as long as the granular material does not exhibit dilation behaviour. When the material exhibits dilation behaviour, the Poisson’s ratio μ0.36, corresponding to the slope of the volumetric strain against axial strain curve at 36% of the peak deviatoric stress, seems to be appropriate in numerical modelling with the Mohr-Coulomb elastoplastic model. In addition, the study also shows that the Mohr-Coulomb elastoplastic model can be used to simulate mechanical behaviour of granular material under small strain, but not appropriate under large strain conditions.KEYWORDS: Mohr-Coulomb modelPoisson’s ratiogranular materialscohesionless sandstriaxial compression testnumerical modellingstability and reliability of numerical modelling Disclosure statementNo potential conflict of interest was reported by the author(s).Additional informationFundingThe work was supported by the Young Scientist Project of the National Key Research and Development Program of China [No. 2021YFC2900600]; Beijing Nova Program [No. 20220484057]; China Scholarship Council [No. 202010300001]; Natural Sciences and Engineering Research Council of Canada [RGPIN-2018-06902 and ALLRP 566888-21].
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Mohr-Coulomb弹塑性模型中颗粒材料泊松比
摘要莫尔-库仑弹塑性模型在岩土工程中应用广泛。尽管众所周知,颗粒状无粘性材料在大范围的法向应力或围压下具有非线性行为,但莫尔-库仑弹塑性模型由于其简单性和在许多商业化软件中的广泛可用性,继续在岩土工程中广泛使用。它的应用需要输入一个关键参数,称为泊松比。然而,随着轴向应变和围压的变化,其数值会发生变化,这是一个很大的挑战。在本研究中,通过数值模拟Mohr-Coulomb弹塑性模型再现应力-应变关系的实验结果,确定了Mohr-Coulomb弹塑性模型中颗粒材料的最佳泊松比。结果表明,只要颗粒材料不表现出膨胀行为,体积应变与轴向应变曲线在峰值偏应力的2%处的斜率对应的泊松比μ0.02可用于Mohr-Coulomb弹塑性模型的数值模拟。当材料表现出膨胀行为时,用Mohr-Coulomb弹塑性模型进行数值模拟时,泊松比μ0.36是合适的,即体积应变与轴向应变曲线在峰值偏应力的36%处的斜率。此外,研究还表明,Mohr-Coulomb弹塑性模型可以用于模拟颗粒材料在小应变条件下的力学行为,但不适用于大应变条件。关键词:Mohr-Coulomb模型泊松比颗粒材料无黏结砂三轴压缩试验数值模拟数值模拟的稳定性和可靠性披露声明作者未报告潜在的利益冲突。本研究由中国国家重点研究与发展计划青年科学家项目[No. 1]资助。2021年yfc2900600];北京新星计划[编号]20220484057);中国国家留学基金委[No. 1]202010300001);加拿大自然科学与工程研究委员会[RGPIN-2018-06902; ALLRP 566888-21]。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
International Journal of Mining Reclamation and Environment
International Journal of Mining Reclamation and Environment ENVIRONMENTAL SCIENCES-MINING & MINERAL PROCESSING
CiteScore
5.70
自引率
8.30%
发文量
30
审稿时长
>12 weeks
期刊介绍: The International Journal of Mining, Reclamation and Environment published research on mining and environmental technology engineering relating to metalliferous deposits, coal, oil sands, and industrial minerals. We welcome environmental mining research papers that explore: -Mining environmental impact assessment and permitting- Mining and processing technologies- Mining waste management and waste minimization practices in mining- Mine site closure- Mining decommissioning and reclamation- Acid mine drainage. The International Journal of Mining, Reclamation and Environment welcomes mining research papers that explore: -Design of surface and underground mines (economics, geotechnical, production scheduling, ventilation)- Mine planning and optimization- Mining geostatics- Mine drilling and blasting technologies- Mining material handling systems- Mine equipment
期刊最新文献
An effective strategy for stacking and reclaiming iron ore piles Mechanical behaviour and instability mechanism of sandstones with impact tendency under different loading paths Sustainable open pit mining through GHG-conscious short-term production scheduling Experimental study on mechanical aging properties of self‑swelling anchorage bolt under chemical corrosion Characterisation of the Pinus banksiana root system on analogues of a cover with capillary barrier effects
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1