Design a Wilkinson power divider with improved passband and rejection band

Abstract

ABSTRACTIn this paper, a Wilkinson power divider based on a new harmonic suppressor structure is proposed with suppressed harmonics and improved operating band parameters. The proposed suppressor structure consists of three resonators. The first resonator is an elliptic rectangular shaped resonator with a short base line and two slots. These slots decrease the resonant frequency location, without changing the dimensions of the resonator. This mode has been fully analysed by investigating the effect of surface current density. The second resonator is an elliptic resonator with a long base length to suppress the second harmonic. The third resonator is a rectangular suppressor to suppress higher order harmonics. The proposed power divider is fabricated and measured. The operating frequency of this power divider is 1.26 GHz, the return loss is 31.5 dB and the insertion loss is 3.1 dB. The operating bandwidth is from 0.99 to 1.4 GHz with a return loss better than 15 dB which shows the fractional bandwidth of FBW = 34%. The second to sixth harmonics have suppression level better than 50 dB, and for higher harmonics up to the 14th harmonic, they have suppression level better than 25 dB.KEYWORDS: Improved passband parametersHigh suppression levelWilkinson Power DividerWide rejection bandharmonic suppressionDisclaimerAs a service to authors and researchers we are providing this version of an accepted manuscript (AM). Copyediting, typesetting, and review of the resulting proofs will be undertaken on this manuscript before final publication of the Version of Record (VoR). During production and pre-press, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal relate to these versions also.