Organosilicon-Based Thin Film Formation in Very High-Frequency Plasma Under Atmospheric Pressure

IF 0.9 Q4 AUTOMATION & CONTROL SYSTEMS International Journal of Automation Technology Pub Date : 2023-11-05 DOI:10.20965/ijat.2023.p0575
Afif Hamzens, Kento Kitamura, Shota Mochizuki, Leapheng Uon, Hiromasa Ohmi, Hiroaki Kakiuchi
{"title":"Organosilicon-Based Thin Film Formation in Very High-Frequency Plasma Under Atmospheric Pressure","authors":"Afif Hamzens, Kento Kitamura, Shota Mochizuki, Leapheng Uon, Hiromasa Ohmi, Hiroaki Kakiuchi","doi":"10.20965/ijat.2023.p0575","DOIUrl":null,"url":null,"abstract":"Owing to recent interest in the production of flexible devices, it is necessary to develop a more convenient approach in which silicon (Si) thin film transistors (TFTs) are fabricated directly onto the flexible substrates at low substrate temperatures. Unfortunately, the physical limitations of conventional plasma-enhanced chemical vapor deposition (PECVD) under low pressures becomes a critical obstacle. In this study, Si film deposition using PECVD under atmospheric pressure excited by very high-frequency electrical power was investigated to overcome this issue. Tetramethylsilane [Si(CH 3 ) 4 ] is used as a source gas that is much safer than silane (SiH 4 ) gas. We investigated the effects of the reactive gas concentration and specific energy (the ratio of input power to unit volume of the reaction gas) on carbon incorporation into the resultant films. Based on the results, we discuss the possibility of forming Si films with sufficiently low carbon content, which is applicable to Si TFTs.","PeriodicalId":43716,"journal":{"name":"International Journal of Automation Technology","volume":null,"pages":null},"PeriodicalIF":0.9000,"publicationDate":"2023-11-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Automation Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.20965/ijat.2023.p0575","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"AUTOMATION & CONTROL SYSTEMS","Score":null,"Total":0}
引用次数: 0

Abstract

Owing to recent interest in the production of flexible devices, it is necessary to develop a more convenient approach in which silicon (Si) thin film transistors (TFTs) are fabricated directly onto the flexible substrates at low substrate temperatures. Unfortunately, the physical limitations of conventional plasma-enhanced chemical vapor deposition (PECVD) under low pressures becomes a critical obstacle. In this study, Si film deposition using PECVD under atmospheric pressure excited by very high-frequency electrical power was investigated to overcome this issue. Tetramethylsilane [Si(CH 3 ) 4 ] is used as a source gas that is much safer than silane (SiH 4 ) gas. We investigated the effects of the reactive gas concentration and specific energy (the ratio of input power to unit volume of the reaction gas) on carbon incorporation into the resultant films. Based on the results, we discuss the possibility of forming Si films with sufficiently low carbon content, which is applicable to Si TFTs.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
常压下甚高频等离子体中有机硅基薄膜的形成
由于最近人们对柔性器件的生产感兴趣,有必要开发一种更方便的方法,在低衬底温度下直接在柔性衬底上制造硅(Si)薄膜晶体管(TFTs)。不幸的是,传统的等离子体增强化学气相沉积(PECVD)在低压下的物理限制成为一个关键障碍。为了克服这一问题,本文研究了在超高频电源激励下常压下PECVD沉积Si膜的方法。四甲基硅烷[Si(ch3) 4]被用作源气体,它比硅烷(sih4)气体安全得多。我们研究了反应气体浓度和比能量(输入功率与单位体积反应气体的比值)对碳入膜的影响。在此基础上,我们讨论了形成碳含量足够低的Si薄膜的可能性,这适用于Si tft。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
International Journal of Automation Technology
International Journal of Automation Technology AUTOMATION & CONTROL SYSTEMS-
CiteScore
2.10
自引率
36.40%
发文量
96
期刊最新文献
Influence of Pilot Hole and Work Material Hardness on Thread Milling with a Wireless Holder System Effect of Different Feed Rates on Chip Evacuation in Drilling of Lead-Free Brass with a Small-Diameter Drill Special Issue on Recent Advanced Manufacturing Science and Technology Initial Wear of Fixed Diamond Wire Tool –Effect of Slurry Assisted Slicing on Machining Mechanism— Tool Path Design of Metal Powder Extrusion in Additive Manufacturing for Suppressing Shape Error Caused During Sintering
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1