Adjoint-Based Design Optimization of a Volute for a Radial Compressor

Abstract

Numerical optimization methods are widely used for designing turbomachinery components due to the cost and time savings they can provide. In the available literature, the shape optimization of radial compressors mainly focuses on improving the impeller alone. However, it is well-established knowledge that the volute plays a key role in the overall performance of the compressor. The aim of the present paper is to perform an adjoint-based optimization of a volute that is designed for the SRV2-O compressor. The CAD model was first created by using the parametrization of 33 design parameters. Then, a butterfly topology was applied to mesh the computational domain with a multi-block structured grid, and an elliptic smoothing procedure was used to improve the quality of the fluid grid. A steady-state RANS CFD solver with a Spalart-Allmaras turbulence model was used to solve the Navier–Stokes equations, and then the flow sensitivities were computed with an adjoint solver. The objective function consists of minimizing the loss coefficient of the volute. The optimization is performed to obtain an improved design with a 14% loss reduction. A detailed flow and design analysis is carried out to highlight the loss reduction mechanisms, followed by the optimizer. Finally, the compressor map of the full stage is compared between the baseline and the optimized volute from the CFD simulations using a mixing plane interface. This research demonstrates the successful use of a gradient-based optimization technique to improve the volute of a radial compressor and opens the door towards simultaneously optimizing the wheel and the volute.