Pb(II) removal using calcium silicates synthesised from industrial wastes: process optimisation and kinetic modelling

IF 2.3 4区 化学 Q3 CHEMISTRY, ANALYTICAL International Journal of Environmental Analytical Chemistry Pub Date : 2023-10-16 DOI:10.1080/03067319.2023.2264202
T. Aravind Kumar, P. Hari Prasad Reddy
{"title":"Pb(II) removal using calcium silicates synthesised from industrial wastes: process optimisation and kinetic modelling","authors":"T. Aravind Kumar, P. Hari Prasad Reddy","doi":"10.1080/03067319.2023.2264202","DOIUrl":null,"url":null,"abstract":"ABSTRACTThis study investigates the potential of calcium silicates (CS) synthesised from granite and marble waste as an adsorbent for sustainable waste management. A simple and chemical-free synthesis method was adopted in the preparation of CS. X-ray diffraction, scanning electron microscopy, zeta potential and particle size distribution techniques were used for the characterisation of CS. As Pb(II) and its derivatives from various industrial effluents exercise significant negative impact on the environment and human health, an attempt was made to remove Pb(II) by adsorption process. Batch experiments were conducted to evaluate the feasibility of removal of pb(II) using CS. The zeta potential value of −83.7 mV and the mean particle size of 916 nm for the prepared CS can enhance adsorption process. The analysis of various adsorption kinetic models reveals that pseudo second order kinetic model exhibited a favourable level of agreement with kinetic data (R2 = 0.999). Response surface methodology utilising central composite design was employed to evaluate various process parameters, such as initial Pb(II) concentration, pH, adsorbent dosage and sonication time on adsorption process. Results from 30 experimental runs performed in accordance with model recommendations concluded that the effect of selected parameters with an R2 value of 0.937 was adequate for the current study. In order to assess the goodness of fit and statistical significance of the model’s performance, ANOVA and Lack of Fit (LOF) tests were conducted. The findings show that Pb(II) can be easily removed from the aqueous solutions using CS as an adsorbent under optimal experimental conditions of 100 mg/l Pb(II) initial concentration, 2 g/l adsorbent dosage, pH of 8 and a sonication time of 45 min.KEYWORDS: Adsorptioncalcium silicatekinetic studiesleadoptimization AcknowledgmentsThe authors would like to thank Dr M Raja Vishwanathan, Associate Professor, Humanities and Social Science, National Institute of technology, Warangal for proofreading the manuscript.Author contributionT Aravind Kumar: Conceptualization, Data curation, Investigation, Methodology, Writing – original draft. P Hari Prasad Reddy: Supervision, Project administration, Resources, Writing – review & editing.Disclosure statementNo potential conflict of interest was reported by the author(s).Data availability statementThe authors declare that the relevant data supporting the findings of the study are available in the article and supplementary data.Additional informationFundingThe authors reported that there is no funding associated with the work featured in this article.","PeriodicalId":13973,"journal":{"name":"International Journal of Environmental Analytical Chemistry","volume":"22 1","pages":"0"},"PeriodicalIF":2.3000,"publicationDate":"2023-10-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Environmental Analytical Chemistry","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1080/03067319.2023.2264202","RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CHEMISTRY, ANALYTICAL","Score":null,"Total":0}
引用次数: 0

Abstract

ABSTRACTThis study investigates the potential of calcium silicates (CS) synthesised from granite and marble waste as an adsorbent for sustainable waste management. A simple and chemical-free synthesis method was adopted in the preparation of CS. X-ray diffraction, scanning electron microscopy, zeta potential and particle size distribution techniques were used for the characterisation of CS. As Pb(II) and its derivatives from various industrial effluents exercise significant negative impact on the environment and human health, an attempt was made to remove Pb(II) by adsorption process. Batch experiments were conducted to evaluate the feasibility of removal of pb(II) using CS. The zeta potential value of −83.7 mV and the mean particle size of 916 nm for the prepared CS can enhance adsorption process. The analysis of various adsorption kinetic models reveals that pseudo second order kinetic model exhibited a favourable level of agreement with kinetic data (R2 = 0.999). Response surface methodology utilising central composite design was employed to evaluate various process parameters, such as initial Pb(II) concentration, pH, adsorbent dosage and sonication time on adsorption process. Results from 30 experimental runs performed in accordance with model recommendations concluded that the effect of selected parameters with an R2 value of 0.937 was adequate for the current study. In order to assess the goodness of fit and statistical significance of the model’s performance, ANOVA and Lack of Fit (LOF) tests were conducted. The findings show that Pb(II) can be easily removed from the aqueous solutions using CS as an adsorbent under optimal experimental conditions of 100 mg/l Pb(II) initial concentration, 2 g/l adsorbent dosage, pH of 8 and a sonication time of 45 min.KEYWORDS: Adsorptioncalcium silicatekinetic studiesleadoptimization AcknowledgmentsThe authors would like to thank Dr M Raja Vishwanathan, Associate Professor, Humanities and Social Science, National Institute of technology, Warangal for proofreading the manuscript.Author contributionT Aravind Kumar: Conceptualization, Data curation, Investigation, Methodology, Writing – original draft. P Hari Prasad Reddy: Supervision, Project administration, Resources, Writing – review & editing.Disclosure statementNo potential conflict of interest was reported by the author(s).Data availability statementThe authors declare that the relevant data supporting the findings of the study are available in the article and supplementary data.Additional informationFundingThe authors reported that there is no funding associated with the work featured in this article.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
利用工业废料合成的硅酸钙去除铅(II):工艺优化和动力学建模
摘要本研究探讨了从花岗岩和大理石废物中合成的硅酸钙(CS)作为可持续废物管理吸附剂的潜力。采用简单、无化学反应的合成方法制备了CS。利用x射线衍射、扫描电镜、zeta电位和粒径分布技术对CS进行了表征。由于各种工业废水中的铅(II)及其衍生物对环境和人体健康产生了重大的负面影响,因此尝试采用吸附法去除Pb(II)。进行了批量实验,评价了CS去除铅(II)的可行性。所制备的CS的zeta电位值为−83.7 mV,平均粒径为916 nm,可以增强吸附过程。对各种吸附动力学模型的分析表明,拟二级动力学模型与动力学数据具有较好的一致性(R2 = 0.999)。采用中心复合设计的响应面法评价了初始浓度、pH、吸附剂投加量和超声时间等工艺参数对吸附过程的影响。根据模型建议进行的30次实验运行结果表明,所选参数的R2值为0.937,对当前研究的影响是足够的。为了评估模型性能的拟合优度和统计显著性,进行了方差分析和缺乏拟合(LOF)检验。结果表明,在Pb(II)初始浓度为100 mg/l、吸附剂用量为2 g/l、pH = 8、超声处理时间为45 min的条件下,CS作为吸附剂可较好地去除Pb(II)。作者要感谢M Raja Vishwanathan博士,瓦朗加尔国家技术研究所人文与社会科学副教授,对手稿的校对。作者贡献:Aravind Kumar:概念化,数据管理,调查,方法论,写作-原稿。P Hari Prasad Reddy:监督,项目管理,资源,写作-审查和编辑。披露声明作者未报告潜在的利益冲突。数据可得性声明作者声明在文章和补充数据中可获得支持研究结果的相关数据。附加信息资金:作者报告说,没有与本文所述工作相关的资金。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
5.90
自引率
7.70%
发文量
373
审稿时长
4.4 months
期刊介绍: International Journal of Environmental Analytical Chemistry comprises original research on all aspects of analytical work related to environmental problems. This includes analysis of organic, inorganic and radioactive pollutants in air, water, sediments and biota; and determination of harmful substances, including analytical methods for the investigation of chemical or metabolic breakdown patterns in the environment and in biological samples. The journal also covers the development of new analytical methods or improvement of existing ones useful for the control and investigation of pollutants or trace amounts of naturally occurring active chemicals in all environmental compartments. Development, modification and automation of instruments and techniques with potential in environment sciences are also part of the journal. Case studies are also considered, particularly for areas where information is scarce or lacking, providing that reported data is significant and representative, either spatially or temporally, and quality assured. Owing to the interdisciplinary nature of this journal, it will also include topics of interest to researchers in the fields of medical science (health sciences), toxicology, forensic sciences, oceanography, food sciences, biological sciences and other fields that, in one way or another, contribute to the knowledge of our environment and have to make use of analytical chemistry for this purpose.
期刊最新文献
Activated carbon from single use surgical mask as an efficient adsorbent for 4-nitrophenol and 2,4-dicholorophenol from aqueous solution: adsorption kinetics, isotherms and thermodynamic study In 2 S 3 /HAp nanocomposite: a comprehensive study on synthesis, structural insights, and high-performance adsorption of Methyl Red dye in water treatment applications LED-enhanced photocatalytic reduction of hexavalent chromium by Cu-doped ZnO nanorods: kinetic modeling, cost analysis, and toxicity assessment Potential health risk assessment of nitrate in groundwater of Tonk district in Rajasthan, north western India Photocatalytic removal of AR14 from aqueous solutions under visible light irradiation by synthesising sugarcane bagasse magnetic graphene oxide
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1