Triboelectric Nanogenerator Prepared from Poly(vinylidene Fluoride-Hexafluoropropylene) Polymer Composite

Abstract

AbstractIn this work, poly(vinylidene fluoride-hexafluoropropylene)/reduced graphene oxide films were prepared by the solution casting method with N,N-dimethylformamide (DMF) and DMF/acetone mixed solvents. The effects of reduced graphene oxide and solvent type on the morphology and crystal structure of the composite films were investigated by using scanning electron microscopy, Fourier-transform infrared spectroscopy, and Raman spectroscopy, respectively. The morphology study showed that the addition of acetone in the film process resulted in the occurrence of tiny pores on the film surfaces. The reduced graphene oxide incorporated into the PVDF-HFP was able to promote the formation of β- phase in the composites. The maximum power of 15.58 µW was obtained from the films using DMF/acetone mixture as solvent.Keywords: Triboelectric nanogeneratoracetoneN,N-dimethylformamidepoly(vinylidene fluoride-hexafluoropropylene)reduced graphene oxide Disclosure StatementNo potential conflict of interest was reported by the author(s).Additional informationFundingThis work was financially supported by the School of Science, King Mongkut’s Institute of Technology Ladkrabang under grant number RA/TA-2562-M-023), Thailand. The authors also acknowledge the Scientific Instruments Centre, School of Science, King Mongkut’s Institute of Technology Ladkrabang for Scientific Instrument Support.