Review of polymer-matrix composites welded to aluminium alloys

Q3 Engineering Acta Periodica Technologica Pub Date : 2023-01-01 DOI:10.2298/apt2354037n
Agha Ndukwe, Chukwudike Onuoha, Chioma Njoku, Nsikan Dan, Justus Anaele
{"title":"Review of polymer-matrix composites welded to aluminium alloys","authors":"Agha Ndukwe, Chukwudike Onuoha, Chioma Njoku, Nsikan Dan, Justus Anaele","doi":"10.2298/apt2354037n","DOIUrl":null,"url":null,"abstract":"This review covers previous work by different scholars on welding polymer-matrix composites to aluminium alloys between 2015 and 2021. The highest tensile shear stress measured for the joint between polymer-matrix composite and aluminium (AA7075) alloy was 59.9 MPa. Welding using top-thermic friction stir was the method that produced the desired outcome. Additionally, the aluminium (AA2024) alloy and fibre-reinforced polymer composite were joined using an ultrasonic metal welding procedure, which produced a weld with a high tensile shear strength of roughly 58 MPa. The friction-aided joining of carbon fibre-reinforced polyphenylene sulphide composites and aluminium (AA7075) alloy has been studied by researchers. A laser treatment was applied to the aluminium surface to enhance the interlocking between the two materials being combined. This development was reported to cause inadequate bonding between the polymer-matrix composite and the metal. Despite this, the joints demonstrated significant load-bearing capacities of up to 10.7 kN.","PeriodicalId":7021,"journal":{"name":"Acta Periodica Technologica","volume":"59 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Periodica Technologica","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2298/apt2354037n","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 0

Abstract

This review covers previous work by different scholars on welding polymer-matrix composites to aluminium alloys between 2015 and 2021. The highest tensile shear stress measured for the joint between polymer-matrix composite and aluminium (AA7075) alloy was 59.9 MPa. Welding using top-thermic friction stir was the method that produced the desired outcome. Additionally, the aluminium (AA2024) alloy and fibre-reinforced polymer composite were joined using an ultrasonic metal welding procedure, which produced a weld with a high tensile shear strength of roughly 58 MPa. The friction-aided joining of carbon fibre-reinforced polyphenylene sulphide composites and aluminium (AA7075) alloy has been studied by researchers. A laser treatment was applied to the aluminium surface to enhance the interlocking between the two materials being combined. This development was reported to cause inadequate bonding between the polymer-matrix composite and the metal. Despite this, the joints demonstrated significant load-bearing capacities of up to 10.7 kN.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
铝合金焊接聚合物基复合材料的研究进展
本文回顾了2015年至2021年间不同学者在焊接聚合物基复合材料到铝合金方面的工作。聚合物基复合材料与铝(AA7075)合金接头的最大拉伸剪切应力为59.9 MPa。采用顶部热摩擦搅拌焊接是产生预期结果的方法。此外,使用超声波金属焊接工艺将铝(AA2024)合金和纤维增强聚合物复合材料连接起来,产生的焊缝具有约58 MPa的高拉伸剪切强度。研究了碳纤维增强聚苯硫醚复合材料与铝(AA7075)合金的摩擦辅助连接。激光处理应用于铝表面,以增强两种材料之间的联锁被组合。据报道,这种发展导致聚合物基复合材料与金属之间的键合不足。尽管如此,接头的承载能力高达10.7 kN。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Acta Periodica Technologica
Acta Periodica Technologica Engineering-Engineering (all)
CiteScore
0.60
自引率
0.00%
发文量
0
审稿时长
8 weeks
期刊最新文献
Megváltozott munkaképességű emberek foglalkoztatása a vendéglátásban, társadalmi megítélés Az ökoszisztéma-szolgáltatások fenntarthatósági adaptációjának integrált elemzési és értékelési lehetőségei A látogatómenedzsment legújabb trendjei a vár- és kastélyturizmus területén Spanyolországban A last-mile logisztika fő kihívásai és lehetséges jövőbeli irányai Impact assessment of Belt and Road Initiative on Chinese economy and society
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1