Numerical study of the influence of the atmospheric pressure on the thermal environment in the passenger cabin

IF 6.1 1区 工程技术 Q1 CONSTRUCTION & BUILDING TECHNOLOGY Building Simulation Pub Date : 2023-11-20 DOI:10.1007/s12273-023-1064-7
Xin Su, Yu Guo, Zhengwei Long, Yi Cao
{"title":"Numerical study of the influence of the atmospheric pressure on the thermal environment in the passenger cabin","authors":"Xin Su, Yu Guo, Zhengwei Long, Yi Cao","doi":"10.1007/s12273-023-1064-7","DOIUrl":null,"url":null,"abstract":"<p>The cabin air pressure remains lower than the horizontal atmospheric pressure when the airplane is in flight. Air pressure is one of the parameters that must be taken into consideration while studying the thermal environment of an airplane cabin. There are still no reference values for aircraft cabins despite the fact that numerous studies on low pressure heat transfer have demonstrated the connection between convective heat transfer coefficient (CHTC) and air pressure. In this paper, a correction method for CHTC under low pressure conditions was established by using the dummy heat dissipation in the low-pressure cabin experiment. On this basis, a thermal environment simulation model was developed, then was applied to the simulation of a seven-row aircraft cabin containing 42 passengers, and the CHTC and heat loss of dummy surface in the cabin were obtained. Finally, the results of PMV calculated by using heat dissipation and air parameters at sampling points were compared. The results show that the modified CHTC can accurately reflect the cabin thermal environment under low pressure conditions, and the correction of CHTC can be realized by adjusting the turbulent Prandtl number, which is nonlinear correlated with the pressure. The simulation results of the thermal environment in the seven-row cabin show that the CHTC changes by about 42% before and after modification. The air pressure decreases during take-off, which reduces the average CHTC of the crew surface from 5.09 W/(m<sup>2</sup>·K) to 4.56 W/(m<sup>2</sup>·K), but the air temperature rises by about 0.2 °C as a whole. The deviation of PMV results calculated by using simulated heat loss data and using air parameters of measuring points in space is up to 0.5, but the latter is representative for calculating the thermal comfort level of the whole cabin.</p>","PeriodicalId":49226,"journal":{"name":"Building Simulation","volume":"301 1","pages":""},"PeriodicalIF":6.1000,"publicationDate":"2023-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Building Simulation","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1007/s12273-023-1064-7","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CONSTRUCTION & BUILDING TECHNOLOGY","Score":null,"Total":0}
引用次数: 0

Abstract

The cabin air pressure remains lower than the horizontal atmospheric pressure when the airplane is in flight. Air pressure is one of the parameters that must be taken into consideration while studying the thermal environment of an airplane cabin. There are still no reference values for aircraft cabins despite the fact that numerous studies on low pressure heat transfer have demonstrated the connection between convective heat transfer coefficient (CHTC) and air pressure. In this paper, a correction method for CHTC under low pressure conditions was established by using the dummy heat dissipation in the low-pressure cabin experiment. On this basis, a thermal environment simulation model was developed, then was applied to the simulation of a seven-row aircraft cabin containing 42 passengers, and the CHTC and heat loss of dummy surface in the cabin were obtained. Finally, the results of PMV calculated by using heat dissipation and air parameters at sampling points were compared. The results show that the modified CHTC can accurately reflect the cabin thermal environment under low pressure conditions, and the correction of CHTC can be realized by adjusting the turbulent Prandtl number, which is nonlinear correlated with the pressure. The simulation results of the thermal environment in the seven-row cabin show that the CHTC changes by about 42% before and after modification. The air pressure decreases during take-off, which reduces the average CHTC of the crew surface from 5.09 W/(m2·K) to 4.56 W/(m2·K), but the air temperature rises by about 0.2 °C as a whole. The deviation of PMV results calculated by using simulated heat loss data and using air parameters of measuring points in space is up to 0.5, but the latter is representative for calculating the thermal comfort level of the whole cabin.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
大气压力对客舱热环境影响的数值研究
当飞机飞行时,机舱气压始终低于水平大气压力。气压是研究飞机客舱热环境时必须考虑的参数之一。尽管大量关于低压换热的研究已经证明了对流换热系数(CHTC)与气压之间的关系,但对于飞机客舱仍然没有参考值。本文利用低压舱试验中的虚拟散热,建立了低压条件下CHTC的修正方法。在此基础上,建立了热环境仿真模型,并将其应用于某7排飞机42人客舱的仿真,得到了客舱内虚拟表面的CHTC和热损失。最后,比较了采用散热和空气参数计算的PMV值。结果表明,改进后的CHTC能准确反映低压条件下的客舱热环境,并且可以通过调整与压力非线性相关的湍流普朗特数来实现对CHTC的修正。对七排座舱热环境的仿真结果表明,改进前后的CHTC变化幅度约为42%。起飞时气压下降,使乘员表面平均CHTC由5.09 W/(m2·K)降至4.56 W/(m2·K),但整体气温上升约0.2℃。利用模拟热损失数据与空间测点空气参数计算的PMV结果偏差达0.5,但后者对于计算整个客舱的热舒适水平具有代表性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Building Simulation
Building Simulation THERMODYNAMICS-CONSTRUCTION & BUILDING TECHNOLOGY
CiteScore
10.20
自引率
16.40%
发文量
0
审稿时长
>12 weeks
期刊介绍: Building Simulation: An International Journal publishes original, high quality, peer-reviewed research papers and review articles dealing with modeling and simulation of buildings including their systems. The goal is to promote the field of building science and technology to such a level that modeling will eventually be used in every aspect of building construction as a routine instead of an exception. Of particular interest are papers that reflect recent developments and applications of modeling tools and their impact on advances of building science and technology.
期刊最新文献
Evolving multi-objective optimization framework for early-stage building design: Improving energy efficiency, daylighting, view quality, and thermal comfort An integrated framework utilizing machine learning to accelerate the optimization of energy-efficient urban block forms Exploring the impact of evaluation methods on Global South building design—A case study in Brazil Mitigation of long-term heat extraction attenuation of U-type medium-deep borehole heat exchanger by climate change Developing an integrated prediction model for daylighting, thermal comfort, and energy consumption in residential buildings based on the stacking ensemble learning algorithm
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1