The Influence of Corrosion Dissolution of the Metal Surface Layer on the Stress Concentration Factor in Butt-Welded Joins

IF 0.7 4区 材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY Materials Science Pub Date : 2024-03-11 DOI:10.1007/s11003-024-00775-w
A. V. Moltasov, A. V. Klymenko
{"title":"The Influence of Corrosion Dissolution of the Metal Surface Layer on the Stress Concentration Factor in Butt-Welded Joins","authors":"A. V. Moltasov, A. V. Klymenko","doi":"10.1007/s11003-024-00775-w","DOIUrl":null,"url":null,"abstract":"<p>The dissolution of the metal surface layer of butt-welded joints samples made of 09G2S steel by the anodic-cathodic process in the electrolyte, as a result of which the geometric parameters of the welded joint changed, was studied. For example, after corrosion tests the radius of transition from the weld metal to the base metal on the facial side of the joint increased from 3.07 to 3.88 mm, and on its root, side increased from 2.16 to 3.09 mm. Changes in the geometrical parameters of a welded joint affect the value of the stress concentration factors (SCF), which determine fatigue life of the welded joints Therefore, analytical calculations of the SCF in the sample of the 09G2S steel butt-weld before and after dissolution of the metal surface layer were performed. In this case, the existing formula for SCF determination on the root side of the joint was modified for the case when the bases of facial and root reinforcements were close enough. It was found that after corrosion dissolution of the metal surface layer, the maximum value of the SCF in the specimen decreased from 1.87 to 1.67.</p>","PeriodicalId":18230,"journal":{"name":"Materials Science","volume":null,"pages":null},"PeriodicalIF":0.7000,"publicationDate":"2024-03-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materials Science","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1007/s11003-024-00775-w","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

The dissolution of the metal surface layer of butt-welded joints samples made of 09G2S steel by the anodic-cathodic process in the electrolyte, as a result of which the geometric parameters of the welded joint changed, was studied. For example, after corrosion tests the radius of transition from the weld metal to the base metal on the facial side of the joint increased from 3.07 to 3.88 mm, and on its root, side increased from 2.16 to 3.09 mm. Changes in the geometrical parameters of a welded joint affect the value of the stress concentration factors (SCF), which determine fatigue life of the welded joints Therefore, analytical calculations of the SCF in the sample of the 09G2S steel butt-weld before and after dissolution of the metal surface layer were performed. In this case, the existing formula for SCF determination on the root side of the joint was modified for the case when the bases of facial and root reinforcements were close enough. It was found that after corrosion dissolution of the metal surface layer, the maximum value of the SCF in the specimen decreased from 1.87 to 1.67.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
金属表层腐蚀溶解对对接焊接接头应力集中系数的影响
研究了 09G2S 钢对接焊接接头样品的金属表层在电解液中的阳极-阴极过程中的溶解情况,其结果是焊接接头的几何参数发生了变化。例如,经过腐蚀试验后,焊点正面从焊接金属到母材金属的过渡半径从 3.07 毫米增加到 3.88 毫米,根部从 2.16 毫米增加到 3.09 毫米。焊接接头几何参数的变化会影响应力集中系数(SCF)值,而应力集中系数决定了焊接接头的疲劳寿命。因此,我们对 09G2S 钢对接焊缝样品在金属表层溶解前后的 SCF 值进行了分析计算。在这种情况下,对现有的接头根部 SCF 测定公式进行了修改,以适用于表面和根部加固层基底足够接近的情况。结果发现,金属表层腐蚀溶解后,试样中 SCF 的最大值从 1.87 降至 1.67。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Materials Science
Materials Science 工程技术-材料科学:综合
CiteScore
1.60
自引率
44.40%
发文量
63
审稿时长
4-8 weeks
期刊介绍: Materials Science reports on current research into such problems as cracking, fatigue and fracture, especially in active environments as well as corrosion and anticorrosion protection of structural metallic and polymer materials, and the development of new materials.
期刊最新文献
Influence of Nanomodification on the Microstructure of the Metal of Welded Joints of Low-Alloy Steels Stress State of a Soft Interlayer under Conditions of Plane and Axisymmetric Strains Modeling of Laser-Modified Layer Reinforced With Silicon Carbide Particles on an Aluminum Alloy Formation Conditions and Properties of High-Entropy Alloys Creating σ-Phase Development of the Methodology for Monitoring the Technical State of Bridge Structures and Establishment of Safe Operating Period
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1