Experimental and thermodynamic assessment of the Cu–In system

IF 1.9 3区 材料科学 Q4 CHEMISTRY, PHYSICAL Calphad-computer Coupling of Phase Diagrams and Thermochemistry Pub Date : 2024-05-03 DOI:10.1016/j.calphad.2024.102700
Fu-Ling Chang, Yu-Hsin Lin, Han-Tang Hung, C.R. Kao
{"title":"Experimental and thermodynamic assessment of the Cu–In system","authors":"Fu-Ling Chang,&nbsp;Yu-Hsin Lin,&nbsp;Han-Tang Hung,&nbsp;C.R. Kao","doi":"10.1016/j.calphad.2024.102700","DOIUrl":null,"url":null,"abstract":"<div><p>Owing to the low melting temperature and excellent mechanical properties, In is considered a potential low-temperature solder. However, the interfacial reaction between In and Cu substrates is still unclear, specifically regarding the stability of CuIn<sub>2</sub>. Although CuIn<sub>2</sub> was often observed at the Cu–In thin film after long-term aging below 100 °C, it is considered as a metastable phase and has not been added into the Cu–In phase diagram yet. In this study, the stability of CuIn<sub>2</sub> and the peritectoid reaction Cu<sub>11</sub>In<sub>9</sub> + In → CuIn<sub>2</sub> were established using the Cu/In diffusion couple, Cu–In alloy phase equilibria, and decomposition investigation of CuIn<sub>2</sub>. The peritectoid temperature was determined to be in the range of 110–105 °C. Finally, thermodynamic assessment was conducted based on the experimental data and the revised Cu–In phase diagram.</p></div>","PeriodicalId":9436,"journal":{"name":"Calphad-computer Coupling of Phase Diagrams and Thermochemistry","volume":"85 ","pages":"Article 102700"},"PeriodicalIF":1.9000,"publicationDate":"2024-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Calphad-computer Coupling of Phase Diagrams and Thermochemistry","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0364591624000427","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
引用次数: 0

Abstract

Owing to the low melting temperature and excellent mechanical properties, In is considered a potential low-temperature solder. However, the interfacial reaction between In and Cu substrates is still unclear, specifically regarding the stability of CuIn2. Although CuIn2 was often observed at the Cu–In thin film after long-term aging below 100 °C, it is considered as a metastable phase and has not been added into the Cu–In phase diagram yet. In this study, the stability of CuIn2 and the peritectoid reaction Cu11In9 + In → CuIn2 were established using the Cu/In diffusion couple, Cu–In alloy phase equilibria, and decomposition investigation of CuIn2. The peritectoid temperature was determined to be in the range of 110–105 °C. Finally, thermodynamic assessment was conducted based on the experimental data and the revised Cu–In phase diagram.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
铜-铟系统的实验和热力学评估
由于铟具有较低的熔化温度和优异的机械性能,因此被认为是一种潜在的低温焊料。然而,In 和铜基底之间的界面反应,特别是 CuIn2 的稳定性仍不清楚。虽然在低于 100 °C 的温度下长期老化后,经常能在铜铟薄膜上观察到 CuIn2,但它被认为是一种可转移相,尚未被添加到铜铟相图中。本研究利用 Cu/In 扩散耦合、Cu-In 合金相平衡和 CuIn2 的分解研究,确定了 CuIn2 的稳定性和包晶反应 Cu11In9 + In → CuIn2。确定包晶温度范围为 110-105 °C。最后,根据实验数据和修订后的 Cu-In 相图进行了热力学评估。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
4.00
自引率
16.70%
发文量
94
审稿时长
2.5 months
期刊介绍: The design of industrial processes requires reliable thermodynamic data. CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry) aims to promote computational thermodynamics through development of models to represent thermodynamic properties for various phases which permit prediction of properties of multicomponent systems from those of binary and ternary subsystems, critical assessment of data and their incorporation into self-consistent databases, development of software to optimize and derive thermodynamic parameters and the development and use of databanks for calculations to improve understanding of various industrial and technological processes. This work is disseminated through the CALPHAD journal and its annual conference.
期刊最新文献
Machine learning assisted CALPHAD framework for thermodynamic analysis of CVD SiOxNy thin films An efficient microstructure simulation framework by integrating phase-field model, general coupling schema and parallelism: Demo in Ni-based superalloys Thermodynamic assessment of the Eu-Rh system by the combination of ab-initio calculations and CALPHAD approach Experimental phase diagram study of the Ni-rich part of the Ni–Cr–Mo ternary system Experimental investigation and thermodynamic optimization of the Ni–Ta–Ti system
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1