Effects of fluid saturation and viscosity on seismic dispersion characteristics in Berea sandstone

Abstract

Despite additional availability of laboratory data from water-saturated sandstone at seismic frequencies, measurements of rock samples saturated with high viscous fluids, particularly at partial saturation, are still rare. To quantify the effects of fluid viscosity and saturation levels on seismic dispersion and attenuation characteristics, we conducted two comparative forced-oscillation measurements in partially saturated sandstone with varying fluid viscosity (e.g., water, glycerin) at seismic frequencies (2-400 Hz). The results demonstrate that both fluid viscosity and saturation levels substantially influence the dispersion and attenuation characteristics at the measured frequencies. Significant dispersion and attenuation are observed in the presence of a relatively small amount of gas (∼6% - 8%) for both glycerin and water saturation cases but vary in their magnitudes and characteristic frequencies. Specifically, the maximum extensional attenuation (∼0.024) occurs at approximately 200 Hz for water-saturated rock at 94% saturation, while at around 30 Hz with a peak of 0.032 for glycerin-saturated rock at 92% saturation. Based on theoretical modeling analysis, we suggest that mesoscopic fluid flow might be a dominant mechanism accounting for the observed attenuation in partial water or glycerin saturation, while the microscopic (squirt) flow mechanism possibly dominates the fully saturated cases.