A Novel Two-dimensional Low-redundancy Array Design for Solar Radio Imaging

Abstract

The radioheliograph is an extensive array of antennas operating on the principle of aperture synthesis to produce images of the Sun. The image acquired by the telescope results from convoluting the Sun’s true brightness distribution with the antenna array’s directional pattern. The imaging quality of the radioheliograph is affected by a multitude of factors, with the performance of the ” dirty beam” being just one component. Other factors such as imaging methods, calibration techniques, clean algorithms, and more also play a significant influence on the resulting image quality. As the layout of the antenna array directly affects the performance of the dirty beam, the design of an appropriate antenna configuration is critical to improving the imaging quality of the radioheliograph. Based on the actual needs of observing the Sun, this work optimized the antenna array design and proposed a two-dimensional low-redundancy array. The proposed array was compared with common T shaped arrays, Y-shaped arrays, uniformly spaced circular arrays, and three-arm spiral arrays. Through simulations and experiments, their performance in terms of sampling point numbers, UV coverage area, beam-half width, sidelobe level, and performance in the absence of antennas are compared and analyzed. It was found that each of these arrays has its advantages, but the two-dimensional low-redundancy array proposed in this paper performs best in overall evaluation. It has the shortest imaging calculation time among the array types and is highly robust when antennas are missing, making it the most suitable choice.