Optimization of Ultrasound-enhanced Subcritical Water Hydrolysis of Oil Palm Empty Fruit Bunch for the Production of Fermentable Sugar

IF 1.4 4区 工程技术 Q3 ENGINEERING, CHEMICAL Periodica Polytechnica Chemical Engineering Pub Date : 2024-05-21 DOI:10.3311/ppch.23183
Ningsi Lick Sangadji, Candra Wijaya, H. Sangian, A. Widjaja
{"title":"Optimization of Ultrasound-enhanced Subcritical Water Hydrolysis of Oil Palm Empty Fruit Bunch for the Production of Fermentable Sugar","authors":"Ningsi Lick Sangadji, Candra Wijaya, H. Sangian, A. Widjaja","doi":"10.3311/ppch.23183","DOIUrl":null,"url":null,"abstract":"To enhance the hydrolysis to produce fermentable sugar, oil palm empty fruit bunch (OPEFB) has undergone ultrasonication pretreatment prior to subjection to subcritical water hydrolysis. This work aims to optimize the effect of temperature, reaction time, and the concentration of sodium dodecyl sulfate (SDS) as the surfactant, with the primary aim of maximizing sugar production in the subcritical water hydrolysis process applied to oil palm empty fruit bunch (OPEFB). The pretreatment process conditions were optimized using response surface methodology of the central composite design (RSM–CCD). The experimental design includes three factors and levels, with a range of 180–220 °C temperature (X1), 60–80 minutes process time (X2), and 1–5% w/w SDS concentration (X3), an α value of 1.68, and reducing sugar concentration (g/L) as response (Y1). The optimum condition for subcritical water hydrolysis of OPEFB was obtained at 208 °C, 78 minutes, and 2.6% w/w SDS concentration with an expected yield of 6.09 g/L. As a result, reducing sugar produced by enzymatic hydrolysis increased by 324.7% compared to raw OPEFB, with sugar yield of 45.64% after 36 hours. Along these, changes in crystallinity, chemical composition, lignocellulosic functional groups, and morphology were analyzed to determine the impact of the pre-treatment on OPEFB.","PeriodicalId":19922,"journal":{"name":"Periodica Polytechnica Chemical Engineering","volume":null,"pages":null},"PeriodicalIF":1.4000,"publicationDate":"2024-05-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Periodica Polytechnica Chemical Engineering","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.3311/ppch.23183","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

Abstract

To enhance the hydrolysis to produce fermentable sugar, oil palm empty fruit bunch (OPEFB) has undergone ultrasonication pretreatment prior to subjection to subcritical water hydrolysis. This work aims to optimize the effect of temperature, reaction time, and the concentration of sodium dodecyl sulfate (SDS) as the surfactant, with the primary aim of maximizing sugar production in the subcritical water hydrolysis process applied to oil palm empty fruit bunch (OPEFB). The pretreatment process conditions were optimized using response surface methodology of the central composite design (RSM–CCD). The experimental design includes three factors and levels, with a range of 180–220 °C temperature (X1), 60–80 minutes process time (X2), and 1–5% w/w SDS concentration (X3), an α value of 1.68, and reducing sugar concentration (g/L) as response (Y1). The optimum condition for subcritical water hydrolysis of OPEFB was obtained at 208 °C, 78 minutes, and 2.6% w/w SDS concentration with an expected yield of 6.09 g/L. As a result, reducing sugar produced by enzymatic hydrolysis increased by 324.7% compared to raw OPEFB, with sugar yield of 45.64% after 36 hours. Along these, changes in crystallinity, chemical composition, lignocellulosic functional groups, and morphology were analyzed to determine the impact of the pre-treatment on OPEFB.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
超声波强化亚临界水水解油棕空果束生产发酵糖的优化研究
为了加强水解以生产可发酵糖,油棕空果束(OPEFB)在亚临界水水解前进行了超声波预处理。这项研究旨在优化温度、反应时间和作为表面活性剂的十二烷基硫酸钠(SDS)浓度的影响,主要目的是最大限度地提高油棕空果束(OPEFB)亚临界水水解工艺的产糖量。采用中心复合设计响应面法(RSM-CCD)对预处理工艺条件进行了优化。实验设计包括三个因子和水平,温度范围为 180-220 °C (X1),工艺时间为 60-80 分钟 (X2),SDS 浓度为 1-5% w/w (X3),α 值为 1.68,还原糖浓度 (g/L) 为响应 (Y1)。OPEFB 亚临界水水解的最佳条件为 208 ℃、78 分钟和 2.6% w/w SDS 浓度,预期产率为 6.09 g/L。因此,与未加工的 OPEFB 相比,酶水解产生的还原糖增加了 324.7%,36 小时后的糖产量为 45.64%。此外,还分析了结晶度、化学成分、木质纤维素官能团和形态的变化,以确定预处理对 OPEFB 的影响。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
3.10
自引率
7.70%
发文量
44
审稿时长
>12 weeks
期刊介绍: The main scope of the journal is to publish original research articles in the wide field of chemical engineering including environmental and bioengineering.
期刊最新文献
The Nanostructure Based SnS Chalcogenide Semiconductor: A Detailed Investigation of Physical and Electrical Properties Study and Optimization of a New Perovskite Solar Cell Structure Based on the Two Absorber Materials Cs2TiBr6 and MASnBr3 Using SCAPS 1D Metal Oxide-based Nanoparticles for Environmental Remediation: Drawbacks and Opportunities Effect of Nanophotocatalyst WO3 Addition on PVDF Membrane Characteristics and Performance Mathematical-model Analysis of the Potential Exposure to Lead, Zinc and Iron Emissions from Consumption of Premium Motor Spirit in Nigeria
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1