Crystallographical analysis of tooth enamel using milligram samples

Abstract

An X-ray diffraction microanalytical method, in which sample is loaded onto a silver membrane filter, was applied to assess the crystal content in tooth enamel. Each enamel powder was first examined at room temperature, and then examined again at intervals after heating to 200, 400, 600, 800, and 1000°C. The hydroxyapatite composition weight and crystal weight of the samples were derived from the standard calibration curves. The “crystal content ratio” was defiend as the ratio of crystal weight to sample weight. The following results were obtained: (1) β-tricalcium phosphate(β-TCP) replaced the hydroxyapatite after heating at the high temperatures: (2) the “crystal content ratio” in the tooth enamel increased with the rise in temperature; and (3) the lattice parameters of the enamel apatite and the β-TCP were changed by the heating. The X-ray diffraction technique has the potential to analyze the crystal content using milligram samples.