Magnetic and mechanical analyses of superconducting coil for the magnetic Czochralsky technique

Abstract

Solar cells, electronics, and the semiconductor industry all need high-quality silicon crystals. The Czochralsky technique has been widely used to make a high-quality single silicon crystal from the silicon melt. However, this technique needs a strong magnetic field to stabilize the melt and control the temperature. In this paper, two coils with a curved shape have been optimized and simulated to produce a transverse magnetic field for the Czochralsky technique grower. The coils face each other and have an opening angle of 150°, and a NbTi superconducting wire was used to wind the coils with 5110 turns. The current was 106 A and flowing in the same direction. The finding results indicated that the magnetic field at the silicon melt center is 0.4 T, and the peak field in coils is 2.95 T. The optimized curve shape coils were compared with conventional coils (circle shape coils). The comparison indicated that the curve shape coils produced a highly uniform magnetic field, required less current, and significantly reduced the outer diameter of the superconducting magnet. In addition, heat generation by the current leads was calculated. In the case of the curve-shaped coils, less heat leakage has been achieved; as a result, the cooling capacity, magnet size, weight, and cost will be reduced. Furthermore, mechanical analysis was performed, and the results showed that the stress in the coils is within the permissible range for NbTi at 4.2 K.