High-quality Ge1−xSnx (x = 0–0.11) realized by UHV-CVD using Ge2H6 and SnCl4: Materials growth, structural/optical properties, and prototype IR photodetectors

Abstract

GeSn materials with Sn contents ranging between 0% and 11% have been successfully grown by using Ge2H6 and SnCl4 in a hot-wall UHV-CVD system at low reaction pressures of 0.2–0.4 Torr. Both fully strained and partially relaxed materials have been produced. It was found that the materials were of high crystallinity as evidenced by few threading dislocations from cross-sectional TEM. Photoluminescence studies have shown that the PL spectra shift to longer wavelengths, and the PL intensity increases exponentially as the Sn contents increase. The photoemission cutoff for a 9.5% Sn sample is beyond 2600 nm, and low temperature PL measurements have confirmed that this sample is already in the direct gap material regime. Prototype photoconductor devices were fabricated with a partially strained 5% Sn sample, showing much smaller dark currents and similar spectral coverage as compared to a fully strained 7.8% Sn device reported in the literature. The reported technical route has provided a new path toward high quality, low cost GeSn epitaxy, and will contribute to the development of group IV optoelectronics.