Amine plasma polymers deposited on porous hydroxyapatite artificial bone with bipolar pulsed discharges

Abstract

A recent in vivo study [Kodama et al., Sci. Rep. 11, 1 (2021)] showed that porous artificial bones coated with amine-containing polymers deposited by plasma-enhanced chemical vapor deposition (PECVD) significantly enhanced bone regeneration. This article reports the chemical and physical properties of amine plasma polymers (PPs) formed under the same deposition conditions, including the film stability for up to two months, the effects of sterilization on the chemical compositions of the films, and the penetration of amine PPs into the inner surfaces of interconnected microscopic pores of the amine PP-coated porous artificial bone. It was found that, immediately after the plasma polymerization process, approximately 20% of nitrogen atoms on the surface of the deposited amine PP formed primary amines. However, the value decreased to approximately 5% over one month if the sample was exposed to ambient air. The relative concentration of primary amines also decreased to a similar value after the sample was sterilized by autoclaving or ethylene oxide gas. Molecular dynamics simulations were used to examine possible formation mechanisms of nitriles in deposit films under the PECVD conditions and found that ion impact can significantly reduce the nitrile content.