Mechanical performance analysis of double-dovetail joint applied to furniture T-shaped components

Abstract

T-shaped mortise and tenon members are the main structure of traditional Chinese furniture. In this paper, the double-dovetail joint used for face-to-face joint of rubber wood (Hevea brasiliensis Muell. Arg) is transformed into a new type of double-dovetail joint and rounded double-dovetail joint for T-shaped members of point joint structure. The ultimate pull-out test and bending strength test were carried out on the two structures and three structures of oval mortise, round rod mortise and right angle mortise. The results show that the ultimate pull-out force of the round double-dovetail joint is 39% higher than that of the double-dovetail joint, and the bending resistance capacity is 8.9% higher, and the strength and stability are better than those of other split mortises and tenons, which proves that this structure can be used in actual production, and also proves that the mortise and tenon connected by the surface has the possibility of transforming into a point connection structure. The concave structure of the rounded double-dovetail joint makes the mortise and tenon fit well, the tenon squeezed tight, and a good bonding effect was achieved. This structure can also provide greater friction and resistance, delay rubber adhesive failure and improve the stability.