Dynamic response and blast resistance of I‐shaped steel‐concrete composite beam under explosive loading

Abstract

To investigate the dynamic mechanical response and damage mechanisms of I‐shaped steel‐concrete composite beams under explosive loads, experimental research and numerical simulations were conducted on steel‐concrete composite structures. The accuracy of the numerical analysis model was validated by comparing the damage characteristics of the structures obtained from explosive tests on the steel‐concrete composite components. Based on this, numerical simulations were performed on steel‐concrete composite beams using the explicit dynamic analysis software ANSYS/LS‐DYNA, and a study on their damage mechanisms was conducted. This study resulted in the acquisition of dynamic mechanical response patterns, including time‐dependent stress, strain, displacement, acceleration, and so on. Different structural damage characteristics under various explosive conditions were summarized, and key parameters affecting the blast resistance of the structure were analyzed. The research findings indicated that, in contrast to the failure characteristics of I‐shaped reinforced concrete (RC) beams, the failure characteristics of I‐shaped steel‐concrete composite beams mainly include punching and shearing failure of the steel‐RC slab and local buckling of the steel beam. Under the same explosive conditions, steel‐concrete composite structures exhibit superior blast resistance, with certain changes in structural parameters significantly improving blast resistance. The research results can provide theoretical support and a scientific basis for the proactive design of blast protection in steel‐concrete beams.