Effect of Long-Term Exposures at Elevated Temperature on Evolution of 08Kh18N10Т Steel Structure

IF 0.5 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY Inorganic Materials: Applied Research Pub Date : 2024-08-08 DOI:10.1134/S2075113324700710
Zh. E. Chulikova, V. V. Ovchinnikov
{"title":"Effect of Long-Term Exposures at Elevated Temperature on Evolution of 08Kh18N10Т Steel Structure","authors":"Zh. E. Chulikova,&nbsp;V. V. Ovchinnikov","doi":"10.1134/S2075113324700710","DOIUrl":null,"url":null,"abstract":"<p><b>Abstract</b>—The effect of exposures in the range of 500–10 000 h at heating temperatures of 450–750°C on changes in the structure and properties of steel 08Kh18N10T has been studied. It has been found that, in the early stages of thermal aging at 450–550°C, the precipitates of finely dispersed carbides are formed, coherent with the austenitic matrix. With an increase in the holding time and aging temperature to 650°C, the sizes of Me<sub>23</sub>C<sub>6</sub> carbide particles sharply increase, which, under a certain combination of temperature–time parameters, evolve into the σ phase with low coherence with the γ-solid solution. However, this phenomenon has little effect on the mechanical properties at room temperature.</p>","PeriodicalId":586,"journal":{"name":"Inorganic Materials: Applied Research","volume":"15 4","pages":"1138 - 1146"},"PeriodicalIF":0.5000,"publicationDate":"2024-08-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Inorganic Materials: Applied Research","FirstCategoryId":"1085","ListUrlMain":"https://link.springer.com/article/10.1134/S2075113324700710","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract—The effect of exposures in the range of 500–10 000 h at heating temperatures of 450–750°C on changes in the structure and properties of steel 08Kh18N10T has been studied. It has been found that, in the early stages of thermal aging at 450–550°C, the precipitates of finely dispersed carbides are formed, coherent with the austenitic matrix. With an increase in the holding time and aging temperature to 650°C, the sizes of Me23C6 carbide particles sharply increase, which, under a certain combination of temperature–time parameters, evolve into the σ phase with low coherence with the γ-solid solution. However, this phenomenon has little effect on the mechanical properties at room temperature.

Abstract Image

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
高温长期暴露对 08Kh18N10Т 钢结构演变的影响
摘要 研究了在 450-750°C 的加热温度下暴露 500-10 000 小时对 08Kh18N10T 钢的结构和性能变化的影响。研究发现,在 450-550°C 热时效的早期阶段,形成了细小分散的碳化物沉淀,与奥氏体基体相一致。随着保温时间和时效温度升高到 650°C,Me23C6 碳化物颗粒的尺寸急剧增大,在一定的温度-时间参数组合下,它们演变成与 γ 固溶体相干性较低的σ 相。不过,这种现象对室温下的机械性能影响不大。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Inorganic Materials: Applied Research
Inorganic Materials: Applied Research Engineering-Engineering (all)
CiteScore
0.90
自引率
0.00%
发文量
199
期刊介绍: Inorganic Materials: Applied Research  contains translations of research articles devoted to applied aspects of inorganic materials. Best articles are selected from four Russian periodicals: Materialovedenie, Perspektivnye Materialy, Fizika i Khimiya Obrabotki Materialov, and Voprosy Materialovedeniya  and translated into English. The journal reports recent achievements in materials science: physical and chemical bases of materials science; effects of synergism in composite materials; computer simulations; creation of new materials (including carbon-based materials and ceramics, semiconductors, superconductors, composite materials, polymers, materials for nuclear engineering, materials for aircraft and space engineering, materials for quantum electronics, materials for electronics and optoelectronics, materials for nuclear and thermonuclear power engineering, radiation-hardened materials, materials for use in medicine, etc.); analytical techniques; structure–property relationships; nanostructures and nanotechnologies; advanced technologies; use of hydrogen in structural materials; and economic and environmental issues. The journal also considers engineering issues of materials processing with plasma, high-gradient crystallization, laser technology, and ultrasonic technology. Currently the journal does not accept direct submissions, but submissions to one of the source journals is possible.
期刊最新文献
Thermal Conductivity of YAG:Nd + Mo Ceramic Composites Obtained by Spark Plasma Sintering The Influence of TiC and TiB2 Reinforcement on the Properties and Structure of Aluminum Alloy AMg2 Highly Porous Ceramic Materials Based on Coarse-Dispersed αAl2O3 Methods for Studying the Electrical Characteristics of the Epitaxial Layers of n/p-InxGa1 – xAs Solid Solutions for Large-Area Device Structures Experimental Assessment of the Adequacy of Numerical Modeling of the Interlayer Crack Resistance of a Laminate Glass-Epoxy Composite under Combined Loading Mode I/II
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1