Mechanical properties of teguline clay pellet mixtures during continuous oedometric compression

Abstract

Clay pellet mixtures are generally compressed to improve their engineering performance. Deepening the comprehension of the mechanical properties of these mixtures in the complete compression process facilitates the benefit to the engineering design and their utilization. In this study, the effects of soil grain size distribution, water content and dry density on the mechanical properties and microstructure of Teguline clay pellet mixtures during a continuous oedometric compression process are explored. Three types of soil pellet mixtures, including mixture A (grain size ≤5 mm), mixture B (≤ 0.4 mm) and mixture C (2–5 mm), were prepared with different water contents of 7%, 8% and 12% respectively. Subsequently, continuous oedometeric compression was undertaken to explore their mechanical behaviours of the soil pellet mixtures. After that, the microstropic structures of the compacted pellet mixtures were investigated using mercury intrusion porosimetry (MIP). The results indicated that mixture A has a minimal initial packing density of pellet mixtures, while mixture C has a maximum one at the initial compression stage. After completion of compression, the compression curves of the pellet mixtures tended to converge uniformity at a semilogarithm coordinate as the vertical stress increased. All of the compression curves presented a concave shape at the plastic compression stage, which is significantly influenced by grain size distribution and water content. In contrast, the elastic compression and rebound behaviours are little affected by the grain size distribution and water content. As far as the microstructure is concerned, compacted samples prepared by mixture A or C presented a unimodal pore structure, while those by mixture B showcased a bimodal pore structure. In comparison with the unimodal pore distribution of the undisturbed stiff clay, the compacted samples displayed a pseudo-unimodal pore distribution because the inter-aggregate pores still existed. A double tangent method was proposed to determine the delimiting pore diameter of the pseudo-unimodal pore distribution curves and found that the delimiting pore diameter decreased with the increase of dry density and water content. Moreover, the inflexion point for the pore diameter of compacted samples prepared by coarse soil was larger than that of fine soil. Combining this work with previous research, it was found that the high compression of coarse soil easily causes the pseudo-unimodal shape, which is also impacted by water content and particle properties. This work could help deepen the understanding of the mechanical characteristics and microstructure of the stiff clay pellet mixtures during continuous oedometric compression.