Chemical treatment, fibre length, and fibre loading affecting the mechanical and morphological characteristics of flax fibre/polylactic acid (PLA) green composites developed by injection moulding Einfluss von chemischer Behandlung, Faserlänge und Faserbelastung auf die mechanischen und morphologischen Eigenschaften von im Spritzgiessverfahren hergestellten grünen Verbundwerkstoffen aus Flachsfasern/Polymilchsäure (PLA)

Abstract

This paper presents the parametric investigation and optimization of various chemical treatment parameters that affect the mechanical performance of the green composite. The injection moulding method was used to produce the green composites using flax fibre (FF) and polylactic acid (PLA). The chemical parameters chosen to investigate their effects are chemical type (sodium hydroxide, sodium carbonate, and potassium hydroxide), chemical concentrations (1 %, 2 %, and 3 % (w/v)), and duration for fibre treatment (2 h, 4 h, and 6 h). The mechanical performance of the green composites was assessed by evaluating the various properties namely strength, modulus, and elongation under tensile, share, flexural, and compression loading conditions. The morphological study was also performed to examine the failure behavior of the composite after mechanical testing. The effect of fibre length (2 mm, 3 mm, 4 mm, 5 mm, and 6 mm) and fibre loading (10 wt.%, 20 wt.%, and 30 wt.%) on the performance of the flax fibre (FF)/polylactic acid (PLA) composite was also investigated. The fibre dispersion, fibre orientation, and fibre length retention were investigated to assess the characteristics of fibre during injection moulding of the developed flax fibre (FF)/polylactic acid (PLA) composite.