Features of Oxidation of Bismuth by High-Density Water-Oxygen Fluid

IF 1.3 4区 工程技术 Q3 ENGINEERING, MECHANICAL Journal of Engineering Thermophysics Pub Date : 2024-09-18 DOI:10.1134/s1810232824030020
O. N. Fedyaeva, A. P. Grebennikov, A. A. Vostrikov
{"title":"Features of Oxidation of Bismuth by High-Density Water-Oxygen Fluid","authors":"O. N. Fedyaeva, A. P. Grebennikov, A. A. Vostrikov","doi":"10.1134/s1810232824030020","DOIUrl":null,"url":null,"abstract":"<h3 data-test=\"abstract-sub-heading\">Abstract</h3><p>The paper presents the results of a study of oxidation of bulk bismuth samples by oxygen, water vapor, and water-oxygen fluid in a reactor heated to 873 K at a rate of 1 K/min with high-density reagents (<span>\\(\\rho_{{\\rm O_{2}}}\\le0.62\\)</span> and <span>\\(\\rho_{{\\rm H_{2}O}}\\le5.24\\)</span> mol/dm<sup>3</sup>). The results include temperature dependences of the pressure of the reaction mixtures. The rate of oxygen consumption is found from these dependences through the Redlich–Kwong equation of state. Formation of dense oxide film during the oxidation of bismuth in the O<sub>2</sub> environment was shown. No oxide formation was detected during treatment of bismuth with water vapor. The combined action of O<sub>2</sub> and H<sub>2</sub>O molecules enhances the oxidation of bismuth and leads to formation of oxides of different compositions and morphologies. At <span>\\(T&gt;720\\)</span> K, the bismuth oxidation rate was observed to increase due to the higher pressure of saturated bismuth vapor.</p>","PeriodicalId":627,"journal":{"name":"Journal of Engineering Thermophysics","volume":null,"pages":null},"PeriodicalIF":1.3000,"publicationDate":"2024-09-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Engineering Thermophysics","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1134/s1810232824030020","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0

Abstract

The paper presents the results of a study of oxidation of bulk bismuth samples by oxygen, water vapor, and water-oxygen fluid in a reactor heated to 873 K at a rate of 1 K/min with high-density reagents (\(\rho_{{\rm O_{2}}}\le0.62\) and \(\rho_{{\rm H_{2}O}}\le5.24\) mol/dm3). The results include temperature dependences of the pressure of the reaction mixtures. The rate of oxygen consumption is found from these dependences through the Redlich–Kwong equation of state. Formation of dense oxide film during the oxidation of bismuth in the O2 environment was shown. No oxide formation was detected during treatment of bismuth with water vapor. The combined action of O2 and H2O molecules enhances the oxidation of bismuth and leads to formation of oxides of different compositions and morphologies. At \(T>720\) K, the bismuth oxidation rate was observed to increase due to the higher pressure of saturated bismuth vapor.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
高密度水氧流体氧化铋的特征
摘要本文介绍了在一个加热到 873 K 的反应器中,氧气、水蒸气和水氧流体以 1 K/min 的速度和高密度试剂(\(\rrho_{/\rm O_{2}}}\le0.62\) and\(\rho_{/\rm H_{2}O}}\le5.24\) mol/dm3)对块状铋样品进行氧化的研究结果。结果包括反应混合物压力的温度依赖性。通过 Redlich-Kwong 状态方程,可以根据这些依赖关系求出氧气消耗率。结果表明,铋在氧气环境中氧化时会形成致密的氧化膜。用水蒸气处理铋时没有检测到氧化物的形成。O2 和 H2O 分子的共同作用增强了铋的氧化,并导致形成不同成分和形态的氧化物。在 \(T>720\) K 条件下,由于饱和铋蒸汽的压力较高,铋的氧化速率被观察到有所增加。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Journal of Engineering Thermophysics
Journal of Engineering Thermophysics THERMODYNAMICS-ENGINEERING, MECHANICAL
CiteScore
2.30
自引率
12.50%
发文量
0
审稿时长
3 months
期刊介绍: Journal of Engineering Thermophysics is an international peer reviewed journal that publishes original articles. The journal welcomes original articles on thermophysics from all countries in the English language. The journal focuses on experimental work, theory, analysis, and computational studies for better understanding of engineering and environmental aspects of thermophysics. The editorial board encourages the authors to submit papers with emphasis on new scientific aspects in experimental and visualization techniques, mathematical models of thermophysical process, energy, and environmental applications. Journal of Engineering Thermophysics covers all subject matter related to thermophysics, including heat and mass transfer, multiphase flow, conduction, radiation, combustion, thermo-gas dynamics, rarefied gas flow, environmental protection in power engineering, and many others.
期刊最新文献
Features of Oxidation of Bismuth by High-Density Water-Oxygen Fluid LDA-Based Experimental Investigation of Velocity Pulsations in the Vortex Tube Hysteresis Phenomena at Boiling in Liquid Film Flowing down the Tubes with Microarc Oxidation Coating Investigation of the Local Equilibrium Approximation in a Planar Momentumless Turbulent Wake in a Passively Stratified Fluid Experimental Study of Characteristics of Activated Carbon Produced from Pine Nut Shells by Pyrolysis Technology Followed by Steam-Gas Activation
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1