{"title":"Jet array impingement heat transfer in a rectangular cavity with effusion holes","authors":"","doi":"10.1016/j.ijmecsci.2024.109698","DOIUrl":null,"url":null,"abstract":"<div><p>Various researchers have studied jet array impingement heat transfer in impingement/effusion cooling systems. However, there is a lack of research on impingement/effusion cooling systems installed within rectangular cavities that focus on the impact of the proximity of the jet hole to the cavity sidewalls on cooling performance. The main objective of this study is to investigate the flow and heat transfer characteristics of jet array impingement with effusion holes in a rectangular cavity, considering various spacings between the cavity sidewalls and the outermost jet hole. The design parameters in this study include the ratio of the jet hole pitch to jet hole diameter of 7.1, 10.0, and 16.7, and the ratio of the distance between the jet and impingement plates to jet hole diameter of 2, 6, and 10, with the Reynolds number based on the jet hole diameter ranging from 2500 to 15,000. Heat transfer characteristics in the stagnation region and wall jet region were examined using local Nusselt number distributions on the impingement surface, measured by liquid crystal thermography. The local Nusselt number was high in the stagnation region and decreased radially from the stagnation region as the wall jet region formed. The closer the outermost jet hole is to the sidewall, the higher the Nusselt number on the impingement surface near the sidewall. Moreover, the flow structure in the rectangular cavity was numerically investigated, and the velocity vectors and streamlines showed that primary and secondary vortices were generated in the middle of two neighboring jets and near the sidewall, respectively. This study also assessed previous average Nusselt number correlations. Based on experimentally determined average Nusselt number data with 54 center unit cells and 1296 side unit cells, new correlations to predict the average Nusselt number on the impingement surface in a rectangular cavity with effusion holes were developed.</p></div>","PeriodicalId":56287,"journal":{"name":"International Journal of Mechanical Sciences","volume":null,"pages":null},"PeriodicalIF":7.1000,"publicationDate":"2024-09-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Mechanical Sciences","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0020740324007392","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0
Abstract
Various researchers have studied jet array impingement heat transfer in impingement/effusion cooling systems. However, there is a lack of research on impingement/effusion cooling systems installed within rectangular cavities that focus on the impact of the proximity of the jet hole to the cavity sidewalls on cooling performance. The main objective of this study is to investigate the flow and heat transfer characteristics of jet array impingement with effusion holes in a rectangular cavity, considering various spacings between the cavity sidewalls and the outermost jet hole. The design parameters in this study include the ratio of the jet hole pitch to jet hole diameter of 7.1, 10.0, and 16.7, and the ratio of the distance between the jet and impingement plates to jet hole diameter of 2, 6, and 10, with the Reynolds number based on the jet hole diameter ranging from 2500 to 15,000. Heat transfer characteristics in the stagnation region and wall jet region were examined using local Nusselt number distributions on the impingement surface, measured by liquid crystal thermography. The local Nusselt number was high in the stagnation region and decreased radially from the stagnation region as the wall jet region formed. The closer the outermost jet hole is to the sidewall, the higher the Nusselt number on the impingement surface near the sidewall. Moreover, the flow structure in the rectangular cavity was numerically investigated, and the velocity vectors and streamlines showed that primary and secondary vortices were generated in the middle of two neighboring jets and near the sidewall, respectively. This study also assessed previous average Nusselt number correlations. Based on experimentally determined average Nusselt number data with 54 center unit cells and 1296 side unit cells, new correlations to predict the average Nusselt number on the impingement surface in a rectangular cavity with effusion holes were developed.
期刊介绍:
The International Journal of Mechanical Sciences (IJMS) serves as a global platform for the publication and dissemination of original research that contributes to a deeper scientific understanding of the fundamental disciplines within mechanical, civil, and material engineering.
The primary focus of IJMS is to showcase innovative and ground-breaking work that utilizes analytical and computational modeling techniques, such as Finite Element Method (FEM), Boundary Element Method (BEM), and mesh-free methods, among others. These modeling methods are applied to diverse fields including rigid-body mechanics (e.g., dynamics, vibration, stability), structural mechanics, metal forming, advanced materials (e.g., metals, composites, cellular, smart) behavior and applications, impact mechanics, strain localization, and other nonlinear effects (e.g., large deflections, plasticity, fracture).
Additionally, IJMS covers the realms of fluid mechanics (both external and internal flows), tribology, thermodynamics, and materials processing. These subjects collectively form the core of the journal's content.
In summary, IJMS provides a prestigious platform for researchers to present their original contributions, shedding light on analytical and computational modeling methods in various areas of mechanical engineering, as well as exploring the behavior and application of advanced materials, fluid mechanics, thermodynamics, and materials processing.