Oocytes Vitrification Using Automated Equipment Based on Microfluidic Chip.

Abstract

Oocyte vitrification has a wide range of applications in assisted reproduction and fertility preservation. It requires precise cryoprotectant agents (CPAs) loading and removal sequences to alleviate osmotic shock, which requires manual manipulation by an embryologist. In this study, a microfluidic system was developed to facilitate the precise adjustment of the CPA concentration around the oocyte by linear loading and removal of CPA. In addition, the microfluidic-based automated vitrification (MAV) device combines CPA loading/removal process, with vitrification process, thereby achieving automated oocyte vitrification. Oocytes were vitrified by Cryotop/QC manual method and MAV method. The results showed that the survival, cleavage, and blastocyst rates of oocytes were 80.44, 54.17, and 32.95% for the MAV method, which were significantly higher than Cryotop manual method (73.35, 43.73, and 23.67%) (p < 0.05). In MAV, solution injection rate during CPA loading/removal process was designed as a 1-segment, 2-segment, and 4-segment function. Accordingly, three concave loading and convex removal protocols were adopted to vitrify oocytes. Oocytes vitrified using the 4-segment function group exhibited increased survival (86.18%), cleavage (63.29%), and blastocyst (45.58%) rates compared to those vitrified using the 1-segment and 2-segment groups. The oocytes vitrification with the highest concentration of CPA, denoted as VS1-TS1, exhibited the highest survival rate after rewarming (86.18%). In contrast, the VS3-TS3 group, characterized by a CPA concentration half that of VS1-TS1, exhibited lower survival (74.14%) and cleavage (59.31%) rates, but displayed the higher blastocyst rate (50.79%) following oocyte activation. Our study demonstrates potential of the MAV device for oocyte or embryo vitrification.