Investigation of fracture mechanical properties of a brass alloy with microstructural variations

IF 4.7 2区 工程技术 Q1 MECHANICS Engineering Fracture Mechanics Pub Date : 2024-10-22 DOI:10.1016/j.engfracmech.2024.110564
Martin Benedikt Klaushofer, Michael Stoschka, Bernd Maier, Florian Grün
{"title":"Investigation of fracture mechanical properties of a brass alloy with microstructural variations","authors":"Martin Benedikt Klaushofer,&nbsp;Michael Stoschka,&nbsp;Bernd Maier,&nbsp;Florian Grün","doi":"10.1016/j.engfracmech.2024.110564","DOIUrl":null,"url":null,"abstract":"<div><div>This study investigates the effect of microstructural variations on the mechanical properties of CuZn35Mn2Al1Fe1-C-GS brass alloy. Specimens taken from positions with different cooling rates in a large cast component exhibit coarse-grained (approximately 5<!--> <!-->mm) and fine-grained (approximately 1<!--> <!-->mm) microstructures. Fine-grained samples demonstrate at least a 7% increase in Ultimate Tensile Strength (UTS) and up to a 33% higher long crack threshold <span><math><mrow><mi>Δ</mi><msub><mrow><mi>K</mi></mrow><mrow><mtext>th,lc</mtext></mrow></msub></mrow></math></span>. Hardness measurements are similar between microstructures. The NASGRO model and cyclic R-curve are applied to fit crack propagation data, and fractographic analysis reveals distinct fracture mechanisms. The results indicate that a fine-grained microstructure enhances tensile strength and crack resistance, providing valuable insights for the design and maintenance of heavy machinery components made from cast brass.</div></div>","PeriodicalId":11576,"journal":{"name":"Engineering Fracture Mechanics","volume":"311 ","pages":"Article 110564"},"PeriodicalIF":4.7000,"publicationDate":"2024-10-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Engineering Fracture Mechanics","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0013794424007276","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 0

Abstract

This study investigates the effect of microstructural variations on the mechanical properties of CuZn35Mn2Al1Fe1-C-GS brass alloy. Specimens taken from positions with different cooling rates in a large cast component exhibit coarse-grained (approximately 5 mm) and fine-grained (approximately 1 mm) microstructures. Fine-grained samples demonstrate at least a 7% increase in Ultimate Tensile Strength (UTS) and up to a 33% higher long crack threshold ΔKth,lc. Hardness measurements are similar between microstructures. The NASGRO model and cyclic R-curve are applied to fit crack propagation data, and fractographic analysis reveals distinct fracture mechanisms. The results indicate that a fine-grained microstructure enhances tensile strength and crack resistance, providing valuable insights for the design and maintenance of heavy machinery components made from cast brass.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
研究具有微观结构变化的黄铜合金的断裂机械性能
本研究探讨了微观结构变化对 CuZn35Mn2Al1Fe1-C-GS 黄铜合金机械性能的影响。从大型铸造部件中不同冷却速度位置取出的试样呈现出粗粒(约 5 毫米)和细粒(约 1 毫米)两种微观结构。细粒样品的极限拉伸强度 (UTS) 至少提高了 7%,长裂纹阈值 ΔKth,lc 最多提高了 33%。不同微结构的硬度测量结果相似。应用 NASGRO 模型和循环 R 曲线来拟合裂纹扩展数据,断口分析揭示了不同的断裂机制。结果表明,细粒度微观结构提高了抗拉强度和抗裂性,为黄铜铸件重型机械部件的设计和维护提供了有价值的见解。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
8.70
自引率
13.00%
发文量
606
审稿时长
74 days
期刊介绍: EFM covers a broad range of topics in fracture mechanics to be of interest and use to both researchers and practitioners. Contributions are welcome which address the fracture behavior of conventional engineering material systems as well as newly emerging material systems. Contributions on developments in the areas of mechanics and materials science strongly related to fracture mechanics are also welcome. Papers on fatigue are welcome if they treat the fatigue process using the methods of fracture mechanics.
期刊最新文献
A novel method for failure probability prediction of plain weave composites considering loading randomness and dispersion of strength Effect of shrinkage-induced initial damage on the frost resistance of concrete in cold regions Predicting fracture strength of polarized GaN semiconductive ceramics under combined mechanical-current loading Multiaxial failure of dual-phase elastomeric composites Experimental and numerical investigation on the failure behaviors of laminates with various shaped cutouts under tensile loading
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1