Rock fragmentation of simulated transversely isotropic rocks under static expansive loadings

Abstract

Rock fragmentation is a critical process for mineral extraction and for mitigating overstressed rock in geotechnical applications. In this study, 3D-printed concrete was used to simulate the stratified rock mass, and experimental and numerical methods were employed to investigate crack propagation under static expansive loadings in transversely isotropic rocks. Two types of cracks were observed in the experiments: P-type (a crack propagates primarily along the weak layer) and T-type (a crack propagates across the weak layers) cracks. The findings revealed that the orientation of layers significantly influenced the initiation and propagation of cracks, with P-type cracks commonly observed in simpler P-P mode fragmentations and more complex P-P-T modes emerging under higher expansive loadings. P-T-T modes were characterized by the simultaneous presence of the T-type crack after an initial P-type crack. The AE energy levels in the P-P-T and P-T-T modes were much higher than those in the P-P mode. 2D-DDA models were further built to understand the effects of the loading scales, layer angles, and locations of weak layers on the cracking sequences. The results provided detailed insights into stress evolutions and the impact of expansive loadings on crack initiation and propagation.