Influence of steam curing on cyclic triaxial characteristics of recycled aggregate concrete: Experimental analysis and DEM simulation

Abstract

The engineering application of steam-cured recycled aggregate concrete (often in a cyclic triaxial stress state) can not only improve the recycling efficiency of resources, but also accelerate the construction progress. In this paper, we adopt a combination of laboratory experiments, theoretical analysis and numerical simulation to study the cyclic triaxial characteristics of recycled aggregate concrete (RAC) under different curing regimes (20℃, 40℃, 60℃ and 80℃). The results indicate that as the steam curing temperature increases, the internal damage caused by high temperature continues to intensify, and the cyclic triaxial failure mode of RAC transitions from shear failure to compression failure, and its peak strength, dynamic elastic modulus, and dilatancy angle all show a downward trend. A linear prediction model is established based on the strong correlation between peak strength and steam curing temperature. As the loading cycles increase, the dynamic elastic modulus and dilatancy angle of RAC show exponential and linear downward trends respectively, and the decline rate increases with the increase of steam curing temperature, and the prediction models for dynamic elastic modulus and dilatancy angle are established based on quantitative relationships between variables. On the basis of experimental analysis results, a cyclic triaxial DEM model considering real recycled aggregates is established by introducing steam-cured damage indexes into the mesoscopic parameters, and its applicability in predicting cyclic triaxial mechanical properties of RAC under different curing regimes is verified. The research outcomes can save a lot of test cost and time consumption for developing steam-cured concrete with better performance, and have important theoretical guidance and practical significance for the wide application of steam-cured concrete.