Effect of severe plastic deformation on surface modification of tungsten exposed to low energy helium ion irradiation

IF 1.9 3区 工程技术 Q1 NUCLEAR SCIENCE & TECHNOLOGY Fusion Engineering and Design Pub Date : 2024-11-20 DOI:10.1016/j.fusengdes.2024.114725
Yashan Guo , Ning Guo , Ao Zhang , Kemin Xue , Ping Li
{"title":"Effect of severe plastic deformation on surface modification of tungsten exposed to low energy helium ion irradiation","authors":"Yashan Guo ,&nbsp;Ning Guo ,&nbsp;Ao Zhang ,&nbsp;Kemin Xue ,&nbsp;Ping Li","doi":"10.1016/j.fusengdes.2024.114725","DOIUrl":null,"url":null,"abstract":"<div><div>The orientation dependence of the surface morphology for polycrystalline W after the He plasma exposure (∼ 50 eV) at ∼ 823 K was systematically investigated. Five different types of undulating morphologies were formed and the edge direction of the undulations was parallel to the 〈100〉 orientation. The relationship among crystal orientation, undulating height and undulating interval was established and the interval coefficient was introduced. The interval and the interval coefficient gradually increase until the tilting angle increases to 36 °. After severe plastic deformation (SPD), the undulating height increased from 5.7 nm for the as-received W to 11.9 nm for the SPDed W and the surface roughness of the SPDed grains increased significantly. Reducing the grains with the {100} plane and inhibiting the formation of unstable nanostructures are helpful to slow down the volume loss of W and improve its irradiation resistance.</div></div>","PeriodicalId":55133,"journal":{"name":"Fusion Engineering and Design","volume":"210 ","pages":"Article 114725"},"PeriodicalIF":1.9000,"publicationDate":"2024-11-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Fusion Engineering and Design","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0920379624005763","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"NUCLEAR SCIENCE & TECHNOLOGY","Score":null,"Total":0}
引用次数: 0

Abstract

The orientation dependence of the surface morphology for polycrystalline W after the He plasma exposure (∼ 50 eV) at ∼ 823 K was systematically investigated. Five different types of undulating morphologies were formed and the edge direction of the undulations was parallel to the 〈100〉 orientation. The relationship among crystal orientation, undulating height and undulating interval was established and the interval coefficient was introduced. The interval and the interval coefficient gradually increase until the tilting angle increases to 36 °. After severe plastic deformation (SPD), the undulating height increased from 5.7 nm for the as-received W to 11.9 nm for the SPDed W and the surface roughness of the SPDed grains increased significantly. Reducing the grains with the {100} plane and inhibiting the formation of unstable nanostructures are helpful to slow down the volume loss of W and improve its irradiation resistance.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
严重塑性变形对受低能氦离子辐照的钨表面改性的影响
系统研究了多晶 W 在 823 K ∼ He 等离子体暴露(∼ 50 eV)后表面形貌的取向依赖性。研究结果表明,在 823 K ∼ He 等离子体暴露(∼ 50 eV)后,W 晶体形成了五种不同的起伏形态,起伏的边缘方向与〈100〉取向平行。建立了晶体取向、起伏高度和起伏间隔之间的关系,并引入了间隔系数。起伏间隔和起伏间隔系数逐渐增大,直到倾斜角增大到 36°。经过剧烈塑性变形(SPD)后,起伏高度从原始 W 的 5.7 nm 增加到 SPD 后 W 的 11.9 nm,SPD 后晶粒的表面粗糙度也显著增加。减少带有{100}平面的晶粒和抑制不稳定纳米结构的形成有助于减缓 W 的体积损失和提高其抗辐照性能。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Fusion Engineering and Design
Fusion Engineering and Design 工程技术-核科学技术
CiteScore
3.50
自引率
23.50%
发文量
275
审稿时长
3.8 months
期刊介绍: The journal accepts papers about experiments (both plasma and technology), theory, models, methods, and designs in areas relating to technology, engineering, and applied science aspects of magnetic and inertial fusion energy. Specific areas of interest include: MFE and IFE design studies for experiments and reactors; fusion nuclear technologies and materials, including blankets and shields; analysis of reactor plasmas; plasma heating, fuelling, and vacuum systems; drivers, targets, and special technologies for IFE, controls and diagnostics; fuel cycle analysis and tritium reprocessing and handling; operations and remote maintenance of reactors; safety, decommissioning, and waste management; economic and environmental analysis of components and systems.
期刊最新文献
Research and development on vanadium alloys for fusion breeder blanket application JET CODAS - the final status Study and analysis of the design considerations for controlling vertical plasma position in ADITYA-U tokamak Novel high temperature tritium blanket designs for confined spaces in spherical tokamak fusion reactors Installation, thermal curing, qualification testing of divertor and position control coils in ADITYA-U tokamak
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1