Crystal-orientation-dependence of irradiation damage in CoCrFeNiMn alloy under heavy ion irradiation at 500°C

IF 3.2 2区 工程技术 Q3 MATERIALS SCIENCE, MULTIDISCIPLINARY Journal of Nuclear Materials Pub Date : 2025-04-01 Epub Date: 2025-03-04 DOI:10.1016/j.jnucmat.2025.155729
Fei Zhu, Feng Zhou, Qiang Zhang, Jinhong Chen, Jiaxin Wu, Ligang Song, Xianfeng Ma
{"title":"Crystal-orientation-dependence of irradiation damage in CoCrFeNiMn alloy under heavy ion irradiation at 500°C","authors":"Fei Zhu,&nbsp;Feng Zhou,&nbsp;Qiang Zhang,&nbsp;Jinhong Chen,&nbsp;Jiaxin Wu,&nbsp;Ligang Song,&nbsp;Xianfeng Ma","doi":"10.1016/j.jnucmat.2025.155729","DOIUrl":null,"url":null,"abstract":"<div><div>As promising nuclear structural materials, high-entropy alloys have attracted extensive attentions due to their excellent anti-irradiation properties. In this work, the crystal-orientation-dependence of irradiation damage in equiatomic CoCrFeNiMn alloy, subjected to 2.5 MeV Fe²⁺ irradiation up to 15 dpa at 500 °C, was investigated using transmission electron microscopy (TEM). The 〈001〉-oriented grain exhibited the worst irradiation resistance, as evidenced by the densest 1/2〈110〉 perfect dislocations, the largest faulted loops and the greatest void swelling among all the damaged orientations. The 〈011〉 grain showed the lowest void swelling. Furthermore, the 〈111〉 grain exhibited faulted loops that were smaller in size and exhibited a higher density. Possible contributions to the orientation-dependent radiation damage of CoCrFeNiMn were discussed. The minimal damage observed in 〈011〉 grain can be attributed to its highest degree of channeling. It is also crucial to consider other contributing factors as well for 〈001〉 and 〈111〉 grains. This study underscores the importance of accounting for orientation when assessing the irradiation damage behavior of polycrystalline SP-CSAs with substantial grain sizes.</div></div>","PeriodicalId":373,"journal":{"name":"Journal of Nuclear Materials","volume":"608 ","pages":"Article 155729"},"PeriodicalIF":3.2000,"publicationDate":"2025-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Nuclear Materials","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0022311525001242","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2025/3/4 0:00:00","PubModel":"Epub","JCR":"Q3","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

As promising nuclear structural materials, high-entropy alloys have attracted extensive attentions due to their excellent anti-irradiation properties. In this work, the crystal-orientation-dependence of irradiation damage in equiatomic CoCrFeNiMn alloy, subjected to 2.5 MeV Fe²⁺ irradiation up to 15 dpa at 500 °C, was investigated using transmission electron microscopy (TEM). The 〈001〉-oriented grain exhibited the worst irradiation resistance, as evidenced by the densest 1/2〈110〉 perfect dislocations, the largest faulted loops and the greatest void swelling among all the damaged orientations. The 〈011〉 grain showed the lowest void swelling. Furthermore, the 〈111〉 grain exhibited faulted loops that were smaller in size and exhibited a higher density. Possible contributions to the orientation-dependent radiation damage of CoCrFeNiMn were discussed. The minimal damage observed in 〈011〉 grain can be attributed to its highest degree of channeling. It is also crucial to consider other contributing factors as well for 〈001〉 and 〈111〉 grains. This study underscores the importance of accounting for orientation when assessing the irradiation damage behavior of polycrystalline SP-CSAs with substantial grain sizes.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
500℃重离子辐照下CoCrFeNiMn合金辐照损伤的晶体取向依赖性
高熵合金作为一种极具发展前景的核结构材料,因其优异的抗辐照性能而受到广泛关注。在这项工作中,使用透射电子显微镜(TEM)研究了在500°C下,2.5 MeV Fe 2 +高达15 dpa的辐照下,等原子CoCrFeNiMn合金中辐照损伤的晶体取向依赖性。< 001 >取向的晶粒抗辐照性能最差,在所有受损取向中,1/2 < 110 >的完美位错密度最大,断裂环最大,空洞膨胀最大。< 011 >的晶粒溶胀程度最低。此外,< 111 >的晶粒呈现出更小、密度更高的断裂环。讨论了CoCrFeNiMn取向依赖性辐射损伤的可能原因。在< 011 >晶粒中观察到的最小损伤可归因于其最大程度的沟槽。对于< 001桶/立方米和< 111桶/立方米的谷物,考虑其他影响因素也是至关重要的。该研究强调了在评估具有大晶粒尺寸的多晶sp - csa的辐照损伤行为时考虑取向的重要性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Journal of Nuclear Materials
Journal of Nuclear Materials 工程技术-材料科学:综合
CiteScore
5.70
自引率
25.80%
发文量
601
审稿时长
63 days
期刊介绍: The Journal of Nuclear Materials publishes high quality papers in materials research for nuclear applications, primarily fission reactors, fusion reactors, and similar environments including radiation areas of charged particle accelerators. Both original research and critical review papers covering experimental, theoretical, and computational aspects of either fundamental or applied nature are welcome. The breadth of the field is such that a wide range of processes and properties in the field of materials science and engineering is of interest to the readership, spanning atom-scale processes, microstructures, thermodynamics, mechanical properties, physical properties, and corrosion, for example. Topics covered by JNM Fission reactor materials, including fuels, cladding, core structures, pressure vessels, coolant interactions with materials, moderator and control components, fission product behavior. Materials aspects of the entire fuel cycle. Materials aspects of the actinides and their compounds. Performance of nuclear waste materials; materials aspects of the immobilization of wastes. Fusion reactor materials, including first walls, blankets, insulators and magnets. Neutron and charged particle radiation effects in materials, including defects, transmutations, microstructures, phase changes and macroscopic properties. Interaction of plasmas, ion beams, electron beams and electromagnetic radiation with materials relevant to nuclear systems.
期刊最新文献
Experimental characterization and constitutive modelling of the ratcheting behaviour of EUROFER97/3 steel at high temperatures Positron annihilation spectroscopy investigation of local short range order in neutron-irradiated NiFeMnCr high-entropy alloy Tensile properties and constitutive laws of ITER grade CuCrZr alloy Insights into crevice corrosion in high temperature molten salt system: nickel-based GH3535 alloy exposed to static FLiNaK salt at 700 °C Atomic insights into irradiation induced precipitation in molybdenum-rhenium alloys
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1