Rowin J.M. Bol , Yading Xu , Mladena Luković , Branko Šavija
{"title":"Does printing direction influence the bond between 3D printed polymeric reinforcement and cementitious matrix?","authors":"Rowin J.M. Bol , Yading Xu , Mladena Luković , Branko Šavija","doi":"10.1016/j.engfailanal.2025.109471","DOIUrl":null,"url":null,"abstract":"<div><div>The use of 3D printed polymers in the form of lattice reinforcement can enhance the mechanical properties of cementitious composites. Methods like Fused Deposition Modelling (FDM) 3D printing enable their creation, but this process has a large (negative) effect on their mechanical properties, with a large dependency on the printing direction. Continuing on our previous study concerned with modelling the anisotropic behaviour of 3D printed polymeric reinforcement, this work focuses on the reinforcement-matrix bond. Because of the layer-by-layer filament extrusion process of the 3D printing technique, the edges of FDM 3D printed polymers are typically composed of ellipses. Based on this, it is hypothesized that morphological effects as a result of the 3D printing technique enhance the bond between 3D printed reinforcement and cementitious matrix: The elliptic geometry potentially facilitates interlocking with the cementitious mortar, thereby possibly enhancing the bond behaviour in certain directions. To investigate the geometrical directional-dependent features at the edges of 3D printed polymers in more detail, micro-scale models are developed. Geometrical effects induced by different printing configurations are studied. The simulation results are verified through meso-scale pull-out experiments. The interlocking effects as a result of the 3D printing technique show to be significant seeing a bond strength increase of up to 56<!--> <!-->% in one of the print configurations compared to the direction without any geometrical effects.</div></div>","PeriodicalId":11677,"journal":{"name":"Engineering Failure Analysis","volume":"174 ","pages":"Article 109471"},"PeriodicalIF":5.7000,"publicationDate":"2025-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Engineering Failure Analysis","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1350630725002122","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2025/3/7 0:00:00","PubModel":"Epub","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0
Abstract
The use of 3D printed polymers in the form of lattice reinforcement can enhance the mechanical properties of cementitious composites. Methods like Fused Deposition Modelling (FDM) 3D printing enable their creation, but this process has a large (negative) effect on their mechanical properties, with a large dependency on the printing direction. Continuing on our previous study concerned with modelling the anisotropic behaviour of 3D printed polymeric reinforcement, this work focuses on the reinforcement-matrix bond. Because of the layer-by-layer filament extrusion process of the 3D printing technique, the edges of FDM 3D printed polymers are typically composed of ellipses. Based on this, it is hypothesized that morphological effects as a result of the 3D printing technique enhance the bond between 3D printed reinforcement and cementitious matrix: The elliptic geometry potentially facilitates interlocking with the cementitious mortar, thereby possibly enhancing the bond behaviour in certain directions. To investigate the geometrical directional-dependent features at the edges of 3D printed polymers in more detail, micro-scale models are developed. Geometrical effects induced by different printing configurations are studied. The simulation results are verified through meso-scale pull-out experiments. The interlocking effects as a result of the 3D printing technique show to be significant seeing a bond strength increase of up to 56 % in one of the print configurations compared to the direction without any geometrical effects.
期刊介绍：
Engineering Failure Analysis publishes research papers describing the analysis of engineering failures and related studies.
Papers relating to the structure, properties and behaviour of engineering materials are encouraged, particularly those which also involve the detailed application of materials parameters to problems in engineering structures, components and design. In addition to the area of materials engineering, the interacting fields of mechanical, manufacturing, aeronautical, civil, chemical, corrosion and design engineering are considered relevant. Activity should be directed at analysing engineering failures and carrying out research to help reduce the incidences of failures and to extend the operating horizons of engineering materials.
Emphasis is placed on the mechanical properties of materials and their behaviour when influenced by structure, process and environment. Metallic, polymeric, ceramic and natural materials are all included and the application of these materials to real engineering situations should be emphasised. The use of a case-study based approach is also encouraged.
Engineering Failure Analysis provides essential reference material and critical feedback into the design process thereby contributing to the prevention of engineering failures in the future. All submissions will be subject to peer review from leading experts in the field.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
