Synthesis, characterization and properties of novel polyamides derived from 4 4' bis(4-carboxy methylene) biphenyl and various diamines.

IF 1.8 4区 化学 Q3 POLYMER SCIENCE Designed Monomers and Polymers Pub Date : 2020-09-30 DOI:10.1080/15685551.2020.1826705
Shivaji D Ghodke, Aslam B Tamboli, Arati V Diwate, Vijay P Ubale, Noormahmad N Maldar
{"title":"Synthesis, characterization and properties of novel polyamides derived from 4 4' bis(4-carboxy methylene) biphenyl and various diamines.","authors":"Shivaji D Ghodke,&nbsp;Aslam B Tamboli,&nbsp;Arati V Diwate,&nbsp;Vijay P Ubale,&nbsp;Noormahmad N Maldar","doi":"10.1080/15685551.2020.1826705","DOIUrl":null,"url":null,"abstract":"<p><p>Novel aromatic aliphatic diacid monomer, 4 4' bis(4-carboxy methylene) biphenyl was synthesized via friedel craft acylation with acetic anhydride followed by willgerodot reaction and used in the preparation of polyamides by direct polycondensation using the Yamazaki phosphorylation reaction with commercial aromatic diamines. These polyamides were obtained in good yield with moderate-to-high-molecular-weight build up as evidenced by inherent viscosities in the range of 0.52-0.96 dlg-1. The XRD studies showed that all the polyamides were amorphous in nature and these polymers dissolved in polar aprotic solvents such as N-methyl-2-pyrrolidone(NMP),N,N-dimethylsulfoxide(DMSO), N,N-dimethyl formamide (DMF) and N,N-dimethyl acetamide. The resulting polyamides were characterized by inherent viscocity measurements, FT-IR, 1H NMR and 13C NMR spectroscopy, solubility, thermogravimetry, X-ray diffraction studies. These polyamides had glass transition temperatures between 210°C and 261°C, and their temperatures at a 10% weight loss were 620 to 710°C and 497 to 597°C in nitrogen and air atmospheres, respectively, which indicates thermally stable polymers.</p>","PeriodicalId":11170,"journal":{"name":"Designed Monomers and Polymers","volume":"23 1","pages":"177-187"},"PeriodicalIF":1.8000,"publicationDate":"2020-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1080/15685551.2020.1826705","citationCount":"2","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Designed Monomers and Polymers","FirstCategoryId":"92","ListUrlMain":"https://doi.org/10.1080/15685551.2020.1826705","RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"POLYMER SCIENCE","Score":null,"Total":0}
引用次数: 2

Abstract

Novel aromatic aliphatic diacid monomer, 4 4' bis(4-carboxy methylene) biphenyl was synthesized via friedel craft acylation with acetic anhydride followed by willgerodot reaction and used in the preparation of polyamides by direct polycondensation using the Yamazaki phosphorylation reaction with commercial aromatic diamines. These polyamides were obtained in good yield with moderate-to-high-molecular-weight build up as evidenced by inherent viscosities in the range of 0.52-0.96 dlg-1. The XRD studies showed that all the polyamides were amorphous in nature and these polymers dissolved in polar aprotic solvents such as N-methyl-2-pyrrolidone(NMP),N,N-dimethylsulfoxide(DMSO), N,N-dimethyl formamide (DMF) and N,N-dimethyl acetamide. The resulting polyamides were characterized by inherent viscocity measurements, FT-IR, 1H NMR and 13C NMR spectroscopy, solubility, thermogravimetry, X-ray diffraction studies. These polyamides had glass transition temperatures between 210°C and 261°C, and their temperatures at a 10% weight loss were 620 to 710°C and 497 to 597°C in nitrogen and air atmospheres, respectively, which indicates thermally stable polymers.

Abstract Image

Abstract Image

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
以4- 4′双(4-羧基亚甲基)联苯和各种二胺为原料的新型聚酰胺的合成、表征和性能。
摘要以乙酸酐为原料,经friedel工艺酰化反应合成了新型芳香族脂肪族二酸单体——4- 4′双(4-羧基亚甲基)联苯,并与商品芳香族二胺采用山崎磷酸化反应直接缩聚制备了聚酰胺。这些聚酰胺的产率高,分子量增加,固有粘度在0.52-0.96 dlg-1之间。XRD研究表明,所有聚酰胺均为无定形,可溶于N-甲基-2-吡罗烷酮(NMP)、N,N-二甲基亚砜(DMSO)、N,N-二甲基甲酰胺(DMF)和N,N-二甲基乙酰胺等极性非质子溶剂中。所得聚酰胺通过固有粘度测量、FT-IR、1H NMR和13C NMR、溶解度、热重、x射线衍射研究进行了表征。这些聚酰胺的玻璃化转变温度在210 ~ 261℃之间,失重10%时在氮气和空气环境中的温度分别为620 ~ 710℃和497 ~ 597℃,表明它们是热稳定的聚合物。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Designed Monomers and Polymers
Designed Monomers and Polymers 化学-高分子科学
CiteScore
3.30
自引率
0.00%
发文量
28
审稿时长
2.1 months
期刊介绍: Designed Monomers and Polymers ( DMP) publishes prompt peer-reviewed papers and short topical reviews on all areas of macromolecular design and applications. Emphasis is placed on the preparations of new monomers, including characterization and applications. Experiments should be presented in sufficient detail (including specific observations, precautionary notes, use of new materials, techniques, and their possible problems) that they could be reproduced by any researcher wishing to repeat the work. The journal also includes macromolecular design of polymeric materials (such as polymeric biomaterials, biomedical polymers, etc.) with medical applications. DMP provides an interface between organic and polymer chemistries and aims to bridge the gap between monomer synthesis and the design of new polymers. Submssions are invited in the areas including, but not limited to: -macromolecular science, initiators, macroinitiators for macromolecular design -kinetics, mechanism and modelling aspects of polymerization -new methods of synthesis of known monomers -new monomers (must show evidence for polymerization, e.g. polycondensation, sequential combination, oxidative coupling, radiation, plasma polymerization) -functional prepolymers of various architectures such as hyperbranched polymers, telechelic polymers, macromonomers, or dendrimers -new polymeric materials with biomedical applications
期刊最新文献
Synthesis and properties of bio-based semi-aromatic heat-resistant copolymer polyamide 5T-co-6T. Progress in synthesis, modification, characterization and applications of hyperbranched polyphosphate polyesters. The effect of polycarboxylate superplasticizer on the strength and hydration performance of alkali slag building materials. Ionic Organic Network-based C3-symmetric@Triazine core as a selective Hg+2 sensor. Cyclodextrin-grafted redox-responsive hydrogel mediated by disulfide bridges for regulated drug delivery.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1