Influence of weather conditions on the durability of acrylic-polyurethane car coatings in an industrial area

IF 1.1 4区 工程技术 Q4 POLYMER SCIENCE Polimery Pub Date : 2021-11-24 DOI:10.14314/polimery.2021.10.1
Magdalena Białomazur, I. Jasińska, K. Kowalczyk, Marlena Musik, K. Pasierbiewicz, R. Wróbel
{"title":"Influence of weather conditions on the durability of acrylic-polyurethane car coatings in an industrial area","authors":"Magdalena Białomazur, I. Jasińska, K. Kowalczyk, Marlena Musik, K. Pasierbiewicz, R. Wróbel","doi":"10.14314/polimery.2021.10.1","DOIUrl":null,"url":null,"abstract":"The influence of weather conditions on the durability of acrylic-polyurethane car coatings during their exposure to industrial plants (Grupa Azoty, Zakłady Chemiczne \"Police\" SA) was investigated. The surface structure and the general appearance of the paint coatings (after 16 months of the test) were examined using an optical microscope and a scanning electron microscope, an optical profilometer and a gloss meter. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) were used to study the composition and chemical structure of the coatings. Convex spots of various sizes were observed on the surface of the tested coatings. Quantitative profilometric analysis showed a clear increase in surface roughness. However, the results of the XPS and FTIR tests did not confirm the chemical degradation of the tested samples. It was shown that the convexities observed on the surfaces of the aged coatings were atmospheric deposits consisting mainly of oxygen, calcium, phosphorus, iron, silicon and carbon. Thorough cleaning of the surfaces resulted in their complete removal.","PeriodicalId":20319,"journal":{"name":"Polimery","volume":" ","pages":""},"PeriodicalIF":1.1000,"publicationDate":"2021-11-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Polimery","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.14314/polimery.2021.10.1","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"POLYMER SCIENCE","Score":null,"Total":0}
引用次数: 1

Abstract

The influence of weather conditions on the durability of acrylic-polyurethane car coatings during their exposure to industrial plants (Grupa Azoty, Zakłady Chemiczne "Police" SA) was investigated. The surface structure and the general appearance of the paint coatings (after 16 months of the test) were examined using an optical microscope and a scanning electron microscope, an optical profilometer and a gloss meter. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) were used to study the composition and chemical structure of the coatings. Convex spots of various sizes were observed on the surface of the tested coatings. Quantitative profilometric analysis showed a clear increase in surface roughness. However, the results of the XPS and FTIR tests did not confirm the chemical degradation of the tested samples. It was shown that the convexities observed on the surfaces of the aged coatings were atmospheric deposits consisting mainly of oxygen, calcium, phosphorus, iron, silicon and carbon. Thorough cleaning of the surfaces resulted in their complete removal.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
某工业区气候条件对丙烯酸-聚氨酯汽车涂料耐久性的影响
天气条件对丙烯酸-聚氨酯汽车涂料暴露于工业工厂(Grupa Azoty, Zakłady Chemiczne“Police”SA)期间耐久性的影响进行了调查。使用光学显微镜和扫描电子显微镜、光学轮廓仪和光泽度仪检查油漆涂层的表面结构和总体外观(经过16个月的测试)。利用x射线光电子能谱(XPS)和傅里叶变换红外光谱(FTIR)研究了涂层的组成和化学结构。在被测涂层表面观察到不同大小的凸点。定量轮廓分析表明,表面粗糙度明显增加。然而,XPS和FTIR测试的结果并没有证实被测样品的化学降解。结果表明,老化涂层表面的凸起是大气沉积物,主要由氧、钙、磷、铁、硅和碳组成。彻底清洗表面使其完全去除。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Polimery
Polimery Materials Science-Polymers and Plastics
CiteScore
2.90
自引率
6.20%
发文量
35
审稿时长
1 months
期刊介绍: The "Polimery" journal, of international circulation, is publishing peerreviewed scientific and technical research papers covering polymer science and technology in the field of polymers, rubbers, chemical fibres and paints. The range of topics covered are raw materials, polymer synthesis, processing and applications of polymers. Apart from scientific and technical research papers the monthly includes technical and commercial information such as reports from fairs and exhibitions as well as home, world and technical news. “Polimery "- an international journal covering the following topics: polymers, rubber, chemical fibres and paints. The Journal is addressed to scientists, managers and engineering staff of universities, Polish Academy of Sciences, R&D institutions, industry, specializing in polymer chemistry, physical chemistry, technology and processing. “Polimery” publishes original, reviewed research, scientific and technology papers in the field of polymer synthesis, analysis, technology and modification, processing, properties, applications and recycling.
期刊最新文献
The effect of natural fillers on the mechanical properties and flammability of low-density polyethylene Rheological properties of polypropylene composites with calcium carbonate under high shear rates Zinc and graphene oxide composites as new protective coatings for oil and gas pipes New intumescent coatings for protection flammable materials interior and outside buildings Synthesis of molecularly printed methyl methacrylate-based polymers for the detection of di(2-ethylhexyl) phthalate and dibutyl phthalate
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1