Abnormal precipitation behaviour of α″-martensite from α-phase under tension–torsion deformation

IF 1.2 4区 材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY Philosophical Magazine Letters Pub Date : 2022-01-12 DOI:10.1080/09500839.2021.2023773
Siqian Zhang, Liangzi Huo, Lijia Chen
{"title":"Abnormal precipitation behaviour of α″-martensite from α-phase under tension–torsion deformation","authors":"Siqian Zhang, Liangzi Huo, Lijia Chen","doi":"10.1080/09500839.2021.2023773","DOIUrl":null,"url":null,"abstract":"ABSTRACT The tension–torsion properties and deformation microstructure of near β titanium alloy after various heat treatment have been investigated by transmission electron microscopy (TEM). The samples after aging treatment at 500°C for 8 h possesses obviously higher strength than those samples undergoing other different treatment on account of thin α” plates distributing uniformly in the β grains. Interestingly, precipitation of α″-martensite in α plates were observed for the first time under tension–torsion deformation. The abnormal precipitation behaviour was attributed mainly to the large tensile-shear stress.","PeriodicalId":19860,"journal":{"name":"Philosophical Magazine Letters","volume":"102 1","pages":"93 - 99"},"PeriodicalIF":1.2000,"publicationDate":"2022-01-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Philosophical Magazine Letters","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1080/09500839.2021.2023773","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

ABSTRACT The tension–torsion properties and deformation microstructure of near β titanium alloy after various heat treatment have been investigated by transmission electron microscopy (TEM). The samples after aging treatment at 500°C for 8 h possesses obviously higher strength than those samples undergoing other different treatment on account of thin α” plates distributing uniformly in the β grains. Interestingly, precipitation of α″-martensite in α plates were observed for the first time under tension–torsion deformation. The abnormal precipitation behaviour was attributed mainly to the large tensile-shear stress.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
拉伸-扭转变形下α相α〃-马氏体的异常析出行为
摘要用透射电子显微镜(TEM)研究了近β钛合金在不同热处理后的拉伸-扭转性能和变形组织。在500°C下时效处理8h后,由于薄的α”板均匀分布在β晶粒中,样品的强度明显高于其他不同处理的样品。有趣的是,在拉伸-扭转变形下,首次在α板中观察到α〃-马氏体的析出。异常的析出行为主要归因于较大的拉剪应力。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Philosophical Magazine Letters
Philosophical Magazine Letters 物理-物理:凝聚态物理
CiteScore
2.60
自引率
0.00%
发文量
25
审稿时长
2.7 months
期刊介绍: Philosophical Magazine Letters is the rapid communications part of the highly respected Philosophical Magazine, which was first published in 1798. Its Editors consider for publication short and timely contributions in the field of condensed matter describing original results, theories and concepts relating to the structure and properties of crystalline materials, ceramics, polymers, glasses, amorphous films, composites and soft matter. Articles emphasizing experimental, theoretical and modelling studies on solids, especially those that interpret behaviour on a microscopic, atomic or electronic scale, are particularly appropriate. Manuscripts are considered on the strict condition that they have been submitted only to Philosophical Magazine Letters , that they have not been published already, and that they are not under consideration for publication elsewhere.
期刊最新文献
Martensitic transformation of reversed austenite in a low-carbon 7Ni steel Machine-learning-assisted analysis of highly transient X-ray imaging sequences of weld pools Assessment of Bayesian guidance strategy to develop bake-hardening ferritic steel Perspective on descriptors of mechanical behaviour of cubic transition-metal carbides and nitrides Design of carbide free bainitic steels for hot rolling practices
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1