Performance Evaluation of PLA Based Biocomposites Reinforced with Photografted PALF

IF 0.7 Q3 MATERIALS SCIENCE, TEXTILES TEKSTILEC Pub Date : 2021-10-26 DOI:10.14502/tekstilec2021.64.230-246
A. M. Rahman, S. Alimuzzaman, R. Khan
{"title":"Performance Evaluation of PLA Based Biocomposites Reinforced with Photografted PALF","authors":"A. M. Rahman, S. Alimuzzaman, R. Khan","doi":"10.14502/tekstilec2021.64.230-246","DOIUrl":null,"url":null,"abstract":"In this study, biocomposites were fabricated through a compression moulding technique that used untreated and grafted pineapple leaf fibre separately with polylactic acid (PLA) as a matrix. For grafting, pineapple leaf fibre (PALF) was chemically modified using two different monomers, i.e. 2-hydroxyethyl methacrylate (HEMA) and methyl methacrylate (MMA) solutions, in the presence of methanol (MeOH) and photoinitiator (Darocur-1664) under ultraviolet (UV) radiation with the aim of improving thermo-mechanical characteristics. Based on grafting efficiency and mechanical attributes, the intensity of UV radiation and monomer concentration were maxi¬mized. A series of solutions, created by varying the concentrations (10–60%) of monomers in MeOH along with 2% photoinitiator, were prepared. Experimental results revealed that composites made of PALF grafted with 30% HEMA at the 15th pass and 40% MMA at the 20th pass of UV radiation achieved the optimum mechanical properties compared with an untreated PALF/PLA composite. The optimized solutions were further enhanced by adding various concentrations (0.5–1.5%) of urea, with the best mechanical features achieved using a 1% concentration of urea. The chemical bonds formed due to photografting were viewed using Fourier transform infrared spectroscopy (FTIR). Degradation behaviour under heat was determined through thermogravimetric analysis, which found that photografted PALF/PLA showed significantly better thermal stability than the un¬treated composite sample. A water uptake test showed that grafting reduced the water retention capacity of the treated composite significantly. Crystallization characteristics were inspected using a differential scanning calorimeter, which showed that grafted PALF had a substantial effect on the degree of crystallization of PLA. In addition, scanning electron microscopy was used to monitor the interfacial bond, and revealed that interfacial adhesion was enhanced by the incorporation of photografted PALF into the matrix.","PeriodicalId":22555,"journal":{"name":"TEKSTILEC","volume":" ","pages":""},"PeriodicalIF":0.7000,"publicationDate":"2021-10-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"TEKSTILEC","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.14502/tekstilec2021.64.230-246","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, TEXTILES","Score":null,"Total":0}
引用次数: 0

Abstract

In this study, biocomposites were fabricated through a compression moulding technique that used untreated and grafted pineapple leaf fibre separately with polylactic acid (PLA) as a matrix. For grafting, pineapple leaf fibre (PALF) was chemically modified using two different monomers, i.e. 2-hydroxyethyl methacrylate (HEMA) and methyl methacrylate (MMA) solutions, in the presence of methanol (MeOH) and photoinitiator (Darocur-1664) under ultraviolet (UV) radiation with the aim of improving thermo-mechanical characteristics. Based on grafting efficiency and mechanical attributes, the intensity of UV radiation and monomer concentration were maxi¬mized. A series of solutions, created by varying the concentrations (10–60%) of monomers in MeOH along with 2% photoinitiator, were prepared. Experimental results revealed that composites made of PALF grafted with 30% HEMA at the 15th pass and 40% MMA at the 20th pass of UV radiation achieved the optimum mechanical properties compared with an untreated PALF/PLA composite. The optimized solutions were further enhanced by adding various concentrations (0.5–1.5%) of urea, with the best mechanical features achieved using a 1% concentration of urea. The chemical bonds formed due to photografting were viewed using Fourier transform infrared spectroscopy (FTIR). Degradation behaviour under heat was determined through thermogravimetric analysis, which found that photografted PALF/PLA showed significantly better thermal stability than the un¬treated composite sample. A water uptake test showed that grafting reduced the water retention capacity of the treated composite significantly. Crystallization characteristics were inspected using a differential scanning calorimeter, which showed that grafted PALF had a substantial effect on the degree of crystallization of PLA. In addition, scanning electron microscopy was used to monitor the interfacial bond, and revealed that interfacial adhesion was enhanced by the incorporation of photografted PALF into the matrix.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
光接枝PALF增强聚乳酸基生物复合材料的性能评价
在本研究中,以聚乳酸(PLA)为基质,分别使用未经处理的菠萝叶纤维和嫁接的菠萝叶纤维,通过压缩成型技术制备生物复合材料。在甲醇(MeOH)和光引发剂(darocurl -1664)的存在下,利用两种不同的单体甲基丙烯酸2-羟乙酯(HEMA)和甲基丙烯酸甲酯(MMA)溶液对菠萝叶纤维(PALF)进行了化学改性,以改善其热机械特性。基于接枝效率和接枝力学性能,实现了UV辐射强度和单体浓度的最大化。制备了一系列溶液,通过改变单体在甲醇中的浓度(10-60%)以及2%的光引发剂来产生。实验结果表明,与未处理的PALF/PLA复合材料相比,在第15次紫外线照射时接枝30% HEMA,在第20次紫外线照射时接枝40% MMA的PALF/PLA复合材料具有最佳的力学性能。通过添加不同浓度(0.5-1.5%)的尿素对优化后的溶液进行进一步强化,以1%浓度的尿素达到最佳力学性能。利用傅里叶变换红外光谱(FTIR)观察了光接枝所形成的化学键。通过热重分析确定了热降解行为,发现光接枝的PALF/PLA比未处理的复合材料样品具有更好的热稳定性。吸水试验表明,接枝处理显著降低了复合材料的保水能力。用差示扫描量热仪检测结晶特性,结果表明接枝PALF对PLA的结晶程度有较大影响。此外,利用扫描电镜对界面结合进行了监测,发现光接枝的PALF加入到基质中增强了界面的附着力。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
TEKSTILEC
TEKSTILEC MATERIALS SCIENCE, TEXTILES-
CiteScore
1.30
自引率
14.30%
发文量
22
审稿时长
12 weeks
期刊最新文献
Study on the Comfort Properties of Knitted Fabrics Produced from Conventional and Sustainable Cotton and Polyester Fibres Green in-situ synthesis of TiO2 in combination with Curcuma longa for the tailoring of multifunctional cotton fabric Effect of Blending Cotton/Bamboo on UV Protection and Functional Purposes of Trilobal Polyester Microfibers Knitted Fabrics Using Different Structures Computer Modelling of Yarn Winding on Conical Bobbins Carpet Back Sizing Quality Assessment by Measuring the Amount of Resin Using Image Processing and Machine Learning Approaches
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1