Jingtao Zhang, Haipeng Zhang, Donghee Lee, S. Ryu, Seunghee Kim
{"title":"Study on the effect of pore-scale heterogeneity and flow rate during repetitive two-phase fluid flow in microfluidic porous media","authors":"Jingtao Zhang, Haipeng Zhang, Donghee Lee, S. Ryu, Seunghee Kim","doi":"10.1144/petgeo2020-062","DOIUrl":null,"url":null,"abstract":"Various energy recovery, storage, conversion and environmental operations may involve repetitive fluid injection and thus, cyclic drainage–imbibition processes. We conducted an experimental study for which polydimethylsiloxane (PDMS)-based micromodels were fabricated with three different levels of pore-space heterogeneity (coefficient of variation, where COV = 0, 0.25 and 0.5) to represent consolidated and/or partially consolidated sandstones. A total of 10 injection-withdrawal cycles were applied to each micromodel at two different flow rates (0.01 and 0.1 ml min−1). The experimental results were analysed in terms of flow morphology, sweep efficiency, residual saturation, the connection of fluids and the pressure gradient. The pattern of the invasion and displacement of the non-wetting fluid converged more readily in the homogeneous model (COV = 0) as the repetitive drainage–imbibition process continued. The overall sweep efficiency converged between 0.4 and 0.6 at all tested flow rates, regardless of different flow rates and COV in this study. In contrast, the effective sweep efficiency was observed to increase with higher COV at the lower flow rate, while that trend became reversed at the higher flow rate. Similarly, the residual saturation of the non-wetting fluid was largest at COV = 0 for the lower flow rate, but it was the opposite for the higher flow-rate case. However, the Minkowski functionals for the boundary length and connectedness of the non-wetting fluid remained quite constant during repetitive fluid flow. Implications of the study results for porous media-compressed air energy storage (PM-CAES) are discussed as a complementary analysis at the end of this paper. Supplementary material: Figures showing the distribution of water (Fig. S1) and oil (Fig. S2) at the end of each drainage and imbibition step in different microfluidic pore-network models are available at https://doi.org/10.6084/m9.figshare.c.5276814 Thematic collection: This article is part of the Energy Geoscience Series available at: https://www.lyellcollection.org/cc/energy-geoscience-series","PeriodicalId":49704,"journal":{"name":"Petroleum Geoscience","volume":" ","pages":""},"PeriodicalIF":1.9000,"publicationDate":"2021-01-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"5","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Petroleum Geoscience","FirstCategoryId":"89","ListUrlMain":"https://doi.org/10.1144/petgeo2020-062","RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"GEOSCIENCES, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 5
Abstract
Various energy recovery, storage, conversion and environmental operations may involve repetitive fluid injection and thus, cyclic drainage–imbibition processes. We conducted an experimental study for which polydimethylsiloxane (PDMS)-based micromodels were fabricated with three different levels of pore-space heterogeneity (coefficient of variation, where COV = 0, 0.25 and 0.5) to represent consolidated and/or partially consolidated sandstones. A total of 10 injection-withdrawal cycles were applied to each micromodel at two different flow rates (0.01 and 0.1 ml min−1). The experimental results were analysed in terms of flow morphology, sweep efficiency, residual saturation, the connection of fluids and the pressure gradient. The pattern of the invasion and displacement of the non-wetting fluid converged more readily in the homogeneous model (COV = 0) as the repetitive drainage–imbibition process continued. The overall sweep efficiency converged between 0.4 and 0.6 at all tested flow rates, regardless of different flow rates and COV in this study. In contrast, the effective sweep efficiency was observed to increase with higher COV at the lower flow rate, while that trend became reversed at the higher flow rate. Similarly, the residual saturation of the non-wetting fluid was largest at COV = 0 for the lower flow rate, but it was the opposite for the higher flow-rate case. However, the Minkowski functionals for the boundary length and connectedness of the non-wetting fluid remained quite constant during repetitive fluid flow. Implications of the study results for porous media-compressed air energy storage (PM-CAES) are discussed as a complementary analysis at the end of this paper. Supplementary material: Figures showing the distribution of water (Fig. S1) and oil (Fig. S2) at the end of each drainage and imbibition step in different microfluidic pore-network models are available at https://doi.org/10.6084/m9.figshare.c.5276814 Thematic collection: This article is part of the Energy Geoscience Series available at: https://www.lyellcollection.org/cc/energy-geoscience-series
期刊介绍:
Petroleum Geoscience is the international journal of geoenergy and applied earth science, and is co-owned by the Geological Society of London and the European Association of Geoscientists and Engineers (EAGE).
Petroleum Geoscience transcends disciplinary boundaries and publishes a balanced mix of articles covering exploration, exploitation, appraisal, development and enhancement of sub-surface hydrocarbon resources and carbon repositories. The integration of disciplines in an applied context, whether for fluid production, carbon storage or related geoenergy applications, is a particular strength of the journal. Articles on enhancing exploration efficiency, lowering technological and environmental risk, and improving hydrocarbon recovery communicate the latest developments in sub-surface geoscience to a wide readership.
Petroleum Geoscience provides a multidisciplinary forum for those engaged in the science and technology of the rock-related sub-surface disciplines. The journal reaches some 8000 individual subscribers, and a further 1100 institutional subscriptions provide global access to readers including geologists, geophysicists, petroleum and reservoir engineers, petrophysicists and geochemists in both academia and industry. The journal aims to share knowledge of reservoir geoscience and to reflect the international nature of its development.