Development of a new fine particle dry separator

Q2 Materials Science Minerals & Metallurgical Processing Pub Date : 2018-05-01 DOI:10.19150/MMP.8289
H. Akbari, Louis Ackah, M. Mohanty
{"title":"Development of a new fine particle dry separator","authors":"H. Akbari, Louis Ackah, M. Mohanty","doi":"10.19150/MMP.8289","DOIUrl":null,"url":null,"abstract":"Dry coal cleaning has generated renewed interest in scientific and coal mining communities alike due to water scarcity in many parts of the world and the numerous tailings ponds that have resulted from traditional wet coal preparation methods. Commercially available dry separation technologies such as air tables and air jigs are mostly effective in cleaning coarse coal with particle size larger than 6.35 mm. The smaller-than-6.35 mm fraction, which might be up to 20 to 40 percent of raw coal, is sent to the clean coal or tailings streams in a dry separation plant without any cleaning. The main objective of this study is to develop, design and fabricate a new density-based dry separator to effectively clean fine coal in the size range of smaller than 6.35 mm to larger than 1 mm.A difficult-to-clean coal sample with particle size smaller than 6.35 mm and flat-shaped shales as main rocks were used in this study. Using a laboratory-scale fluidization bed, the optimum air flow rate for fluidization of fine particles in air tables was found, which was much less than that for coarse coal. The perforations diameter and open area of the separating deck of the air table were also found to be critical for fine particle separation. These findings led to the development of a new air table named SIU Airtable for cleaning fine coal sized smaller than 6.35 mm and larger than 1 mm. The new air table has a unique air distribution and fluidization system for fine particles, along with adjustable vibration frequency and direction. It also has an optional extended section to lower the moisture content of high-moisture fine coal using part of the fluidization air. The experiments showed that an ash rejection of about 49 percent could be achieved with a combustible recovery of around 89 percent, indicating suitable separation. Furthermore, increasing ash rejection to 70 percent gives a combustible recovery of 72 percent, indicating that the separation performance of the new air table is close to the fine coal washability data.","PeriodicalId":18536,"journal":{"name":"Minerals & Metallurgical Processing","volume":"35 1","pages":"77-86"},"PeriodicalIF":0.0000,"publicationDate":"2018-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.19150/MMP.8289","citationCount":"2","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Minerals & Metallurgical Processing","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.19150/MMP.8289","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Materials Science","Score":null,"Total":0}
引用次数: 2

Abstract

Dry coal cleaning has generated renewed interest in scientific and coal mining communities alike due to water scarcity in many parts of the world and the numerous tailings ponds that have resulted from traditional wet coal preparation methods. Commercially available dry separation technologies such as air tables and air jigs are mostly effective in cleaning coarse coal with particle size larger than 6.35 mm. The smaller-than-6.35 mm fraction, which might be up to 20 to 40 percent of raw coal, is sent to the clean coal or tailings streams in a dry separation plant without any cleaning. The main objective of this study is to develop, design and fabricate a new density-based dry separator to effectively clean fine coal in the size range of smaller than 6.35 mm to larger than 1 mm.A difficult-to-clean coal sample with particle size smaller than 6.35 mm and flat-shaped shales as main rocks were used in this study. Using a laboratory-scale fluidization bed, the optimum air flow rate for fluidization of fine particles in air tables was found, which was much less than that for coarse coal. The perforations diameter and open area of the separating deck of the air table were also found to be critical for fine particle separation. These findings led to the development of a new air table named SIU Airtable for cleaning fine coal sized smaller than 6.35 mm and larger than 1 mm. The new air table has a unique air distribution and fluidization system for fine particles, along with adjustable vibration frequency and direction. It also has an optional extended section to lower the moisture content of high-moisture fine coal using part of the fluidization air. The experiments showed that an ash rejection of about 49 percent could be achieved with a combustible recovery of around 89 percent, indicating suitable separation. Furthermore, increasing ash rejection to 70 percent gives a combustible recovery of 72 percent, indicating that the separation performance of the new air table is close to the fine coal washability data.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
新型细颗粒干法分选机的研制
由于世界许多地区缺水,以及传统湿法选煤方法产生的大量尾矿库,干法洗煤再次引起了科学界和煤矿界的兴趣。市售的干式分离技术,如气动台和气动夹具,在清洁粒度大于6.35 mm的粗煤方面最为有效。小于6.35 mm(可能高达原煤的20%至40%)的部分被送往干式分离厂的洁净煤或尾矿流,无需任何清洁。本研究的主要目的是开发、设计和制造一种新的基于密度的干式分离器,以有效清洁尺寸小于6.35 mm至大于1 mm的细粒煤。本研究使用了粒径小于6.35毫米且以扁平页岩为主要岩石的难以清洁的煤样。利用实验室规模的流化床,找到了气流床中细颗粒流化的最佳空气流速,该流速远小于粗煤。还发现气台分离平台的穿孔直径和开口面积对细粒分离至关重要。这些发现导致开发了一种名为SIU Airtable的新型风台,用于清洁尺寸小于6.35 mm和大于1 mm的细粒煤。该新型风台具有独特的空气分配和细颗粒流化系统,以及可调节的振动频率和方向。它还有一个可选的延伸部分,用于使用部分流化空气降低高水分细粒煤的水分含量。实验表明,可以实现约49%的排灰率和约89%的可燃物回收率,这表明合适的分离。此外,将排灰率提高到70%,可获得72%的可燃物回收率,表明新空气表的分离性能接近细粒煤的可选性数据。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Minerals & Metallurgical Processing
Minerals & Metallurgical Processing 工程技术-矿业与矿物加工
CiteScore
0.84
自引率
0.00%
发文量
0
审稿时长
>12 weeks
期刊介绍: For over twenty-five years, M&MP has been your source for the newest thinking in the processing of minerals and metals. We cover the latest developments in a wide range of applicable disciplines, from metallurgy to computer science to environmental engineering. Our authors, experts from industry, academia and the government, present state-of-the-art research from around the globe.
期刊最新文献
Pressure leaching of copper concentrates at Morenci, Arizona — 10 years of experience Effect of microwave treatment on the surface properties of chalcopyrite Effects of cake thickness and pressure on the filtration of coal refuse slurry Direct sulfuric acid leaching of zinc sulfide concentrate using ozone as oxidant under atmospheric pressure Validation of electrolyte conductivity models in industrial copper electrorefining
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1