Study on the extraction of poor scandium from low-grade rare earth ores

IF 1.3 4区 材料科学 Q3 METALLURGY & METALLURGICAL ENGINEERING International Journal of Cast Metals Research Pub Date : 2023-04-07 DOI:10.1080/13640461.2023.2199505
Xiaojun Yang, Xunmei Zhu, Guoliang Yin, Kun Zhou, Zhenhua Feng, Kun Zhu
{"title":"Study on the extraction of poor scandium from low-grade rare earth ores","authors":"Xiaojun Yang, Xunmei Zhu, Guoliang Yin, Kun Zhou, Zhenhua Feng, Kun Zhu","doi":"10.1080/13640461.2023.2199505","DOIUrl":null,"url":null,"abstract":"ABSTRACT Based on the analysis of chemical composition and the phase of scandium-containing clay type rare earth ore in a place in China, it is found that the content of scandium in the ore is 18.55 g/t. Due to the low leaching rate of direct acid leaching, the effect of the roasting process on the leaching rate of scandium from the raw ore was investigated. By comparing the operation of the two leaching processes, oxidised roasting-hydrochloric acid leaching and alkali roasting-hydrochloric acid leaching, we obtain the optimal technical conditions for both leaching processes. At the same time, the mechanism of alkali roasting was investigated and the conclusions obtained are of some reference for the extraction of scandium from low-grade rare earth ores.","PeriodicalId":13939,"journal":{"name":"International Journal of Cast Metals Research","volume":null,"pages":null},"PeriodicalIF":1.3000,"publicationDate":"2023-04-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Cast Metals Research","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1080/13640461.2023.2199505","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

Abstract

ABSTRACT Based on the analysis of chemical composition and the phase of scandium-containing clay type rare earth ore in a place in China, it is found that the content of scandium in the ore is 18.55 g/t. Due to the low leaching rate of direct acid leaching, the effect of the roasting process on the leaching rate of scandium from the raw ore was investigated. By comparing the operation of the two leaching processes, oxidised roasting-hydrochloric acid leaching and alkali roasting-hydrochloric acid leaching, we obtain the optimal technical conditions for both leaching processes. At the same time, the mechanism of alkali roasting was investigated and the conclusions obtained are of some reference for the extraction of scandium from low-grade rare earth ores.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
从低品位稀土矿石中提取贫钪的研究
摘要通过对我国某地区含钪粘土型稀土矿的化学成分和物相分析,发现该矿中钪含量为18.55 g/t。由于直接酸浸的浸出率较低,研究了焙烧工艺对原矿中钪浸出率的影响。通过对氧化焙烧盐酸浸出和碱焙烧盐酸浸出两种浸出工艺的操作比较,得出了两种浸出过程的最佳工艺条件。同时对碱焙烧机理进行了研究,所得结论对低品位稀土矿中钪的提取具有一定的参考价值。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
2.70
自引率
7.10%
发文量
14
审稿时长
7.5 months
期刊介绍: The International Journal of Cast Metals Research is devoted to the dissemination of peer reviewed information on the science and engineering of cast metals, solidification and casting processes. Assured production of high integrity castings requires an integrated approach that optimises casting, mould and gating design; mould materials and binders; alloy composition and microstructure; metal melting, modification and handling; dimensional control; and finishing and post-treatment of the casting. The Journal reports advances in both the fundamental science and materials and production engineering contributing to the successful manufacture of fit for purpose castings.
期刊最新文献
The corrosion mechanism of grey cast-iron yacht keel in marine environment during long-term exposure Silicon carbide-embedded AZ91E alloy nanocomposite hybridised with chopped basalt fibre: performance measures Characteristics performance evaluation of AZ91-fly ash composite developed by vacuum associated stir processing A7075 alloy reinforced metal matrix composites fabricated through stircasting route: a review Fabrication of nano SiC and BF-bonded magnesium alloy (AZ80) hybrid nanocomposite via liquid state stir casting process: characteristics study
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1