E. Cusson, A. Akbarzadeh, D. Therriault, D. Rodrigue
{"title":"Density graded polyethylene foams: Effect of processing conditions on mechanical properties","authors":"E. Cusson, A. Akbarzadeh, D. Therriault, D. Rodrigue","doi":"10.1177/0262489319839632","DOIUrl":null,"url":null,"abstract":"Uniform foams (UF) and density graded foams (DGF) were produced by using similar or different temperatures on both sides of a compression molding system. The samples were produced using linear low density polyethylene as the matrix and activated azodicarbonamide as the chemical blowing agent. Morphological properties of the produced samples were analyzed via scanning electron microscopy to relate them to their mechanical properties. In particular, flexural and impact properties are reported for samples produced under a range of temperatures (140–200°C) and blowing agent concentration (0.7–1.0 wt%). The experimental results showed that a significant difference can be obtained in flexural modulus (up to 17%) and impact strength (up to 48%) depending on the side the stress is applied on. In all cases, the DGF showed better mechanical responses than UF of similar relative density for the range of conditions tested.","PeriodicalId":9816,"journal":{"name":"Cellular Polymers","volume":"38 1","pages":"14 - 3"},"PeriodicalIF":1.3000,"publicationDate":"2019-03-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1177/0262489319839632","citationCount":"7","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Cellular Polymers","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1177/0262489319839632","RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, BIOMATERIALS","Score":null,"Total":0}
引用次数: 7
Abstract
Uniform foams (UF) and density graded foams (DGF) were produced by using similar or different temperatures on both sides of a compression molding system. The samples were produced using linear low density polyethylene as the matrix and activated azodicarbonamide as the chemical blowing agent. Morphological properties of the produced samples were analyzed via scanning electron microscopy to relate them to their mechanical properties. In particular, flexural and impact properties are reported for samples produced under a range of temperatures (140–200°C) and blowing agent concentration (0.7–1.0 wt%). The experimental results showed that a significant difference can be obtained in flexural modulus (up to 17%) and impact strength (up to 48%) depending on the side the stress is applied on. In all cases, the DGF showed better mechanical responses than UF of similar relative density for the range of conditions tested.
期刊介绍：
Cellular Polymers is concerned primarily with the science of foamed materials, the technology and state of the art for processing and fabricating, the engineering techniques and principles of the machines used to produce them economically, and their applications in varied and wide ranging uses where they are making an increasingly valuable contribution.
Potential problems for the industry are also covered, including fire performance of materials, CFC-replacement technology, recycling and environmental legislation. Reviews of technical and commercial advances in the manufacturing and application technologies are also included.
Cellular Polymers covers these and other related topics and also pays particular attention to the ways in which the science and technology of cellular polymers is being developed throughout the world.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
