Magnesium Oxide and Magnesium Fluoride Nanopowders Produced in a Diffuse Nanosecond Discharge in Argon

IF 2.7 Q1 MATERIALS SCIENCE, CERAMICS Ceramics-Switzerland Pub Date : 2023-07-06 DOI:10.3390/ceramics6030090
D. Beloplotov, K. Savkin, V. Semin, D. Sorokin
{"title":"Magnesium Oxide and Magnesium Fluoride Nanopowders Produced in a Diffuse Nanosecond Discharge in Argon","authors":"D. Beloplotov, K. Savkin, V. Semin, D. Sorokin","doi":"10.3390/ceramics6030090","DOIUrl":null,"url":null,"abstract":"The synthesis of the nanopowders of magnesium oxide and magnesium fluoride during the operation of a repetitive diffuse nanosecond discharge in argon at various pressures was performed. Nanosecond voltage pulses with an amplitude of −70 kV, a rise time of 0.7 ns, and a duration of 0.7 ns were applied across a point-to-plane gap of 2 mm in length. The pulse repetition rate was 60 Hz. The high-voltage pointed electrode was made of magnesium. A diffuse discharge cold plasma was formed under these conditions. Nanoparticles were produced as a result of an explosion of microprotrusions on the surface of the magnesium electrode duo to a high current density. Lines of magnesium atoms and ions were observed in the emission optical spectrum. Under the actions of the gas dynamics processes caused by the plasma channel expansion during the interpulse period, nanoparticles were deposited onto the surface of the grounded plane electrode and the side wall of the gas discharge chamber. The morphology, elemental, and phase composition of the powders were studied using transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS).","PeriodicalId":33263,"journal":{"name":"Ceramics-Switzerland","volume":null,"pages":null},"PeriodicalIF":2.7000,"publicationDate":"2023-07-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ceramics-Switzerland","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3390/ceramics6030090","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
引用次数: 0

Abstract

The synthesis of the nanopowders of magnesium oxide and magnesium fluoride during the operation of a repetitive diffuse nanosecond discharge in argon at various pressures was performed. Nanosecond voltage pulses with an amplitude of −70 kV, a rise time of 0.7 ns, and a duration of 0.7 ns were applied across a point-to-plane gap of 2 mm in length. The pulse repetition rate was 60 Hz. The high-voltage pointed electrode was made of magnesium. A diffuse discharge cold plasma was formed under these conditions. Nanoparticles were produced as a result of an explosion of microprotrusions on the surface of the magnesium electrode duo to a high current density. Lines of magnesium atoms and ions were observed in the emission optical spectrum. Under the actions of the gas dynamics processes caused by the plasma channel expansion during the interpulse period, nanoparticles were deposited onto the surface of the grounded plane electrode and the side wall of the gas discharge chamber. The morphology, elemental, and phase composition of the powders were studied using transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS).
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
氩中纳米扩散放电制备氧化镁和氟化镁纳米粒子
在不同压力的氩气中进行重复扩散纳秒放电,制备了氧化镁和氟化镁纳米粉体。在长度为2mm的点对面间隙上施加振幅为- 70 kV、上升时间为0.7 ns、持续时间为0.7 ns的纳秒级电压脉冲。脉冲重复频率为60 Hz。高压尖电极是由镁制成的。在此条件下形成了扩散放电冷等离子体。纳米颗粒的产生是由于镁电极表面的微突起爆炸到高电流密度的结果。在发射光谱中观察到镁原子和离子的谱线。在脉冲间期等离子体通道膨胀引起的气体动力学过程的作用下,纳米颗粒沉积在接地面电极表面和气体放电室侧壁上。利用透射电子显微镜(TEM)和能量色散x射线能谱仪(EDS)研究了粉末的形貌、元素和相组成。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
3.00
自引率
7.10%
发文量
66
审稿时长
10 weeks
期刊最新文献
Non-Invasive On-Site XRF and Raman Classification and Dating of Ancient Ceramics: Application to 18th and 19th Century Meissen Porcelain (Saxony) and Comparison with Chinese Porcelain Biomechanical Behavior of Lithium-Disilicate-Modified Endocrown Restorations: A Three-Dimensional Finite Element Analysis Preparation and Characterization of Freeze-Dried β-Tricalcium Phosphate/Barium Titanate/Collagen Composite Scaffolds for Bone Tissue Engineering in Orthopedic Applications Ceramic Filters for the Efficient Removal of Azo Dyes and Pathogens in Water Bioinspired Mechanical Materials—Development of High-Toughness Ceramics through Complexation of Calcium Phosphate and Organic Polymers
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1