OPTIMIZATION OF THE MANUFACTURING OF METASEQUOIA-BASED THREE-LAYER STRUCTURE PARQUET FLOORING BY A RESPONSE SURFACE METHODOLOGY

Abstract

On the basis of a single-factor experiment, a mathematical model was established by the response surface analysis method based on the Box-Behnken experimental design principle. The effects of three factors, including hot-pressing temperature, hot-pressing time, and hot-pressing pressure, and their interactions on the modulus of rupture (MOR) of Metasequoia-based three-layered structure parquet flooring were studied. The results show that the quadratic polynomial model in the regression equation is significant, and the correlation between the value predicted by the model and the experimental value is 91.17%. The optimized best hot-pressing process parameters are determined to be as follows: hot-pressing temperature of 96.03°C, hot-pressing time of 6.70 min, and hot-pressing pressure of 8 kg·cm-2. Under these conditions, the best MOR are obtained, reaching a value of 102.05 MPa. The theoretically predicted value is in good agreement with the experimental results.