Photocatalytic degradation of dyes in water by analytical reagent grades ZnO, TiO 2 and SnO 2 : a comparative study

D. Shinde, P. Tambade, M. Chaskar, Kisan M. Gadave
{"title":"Photocatalytic degradation of dyes in water by analytical reagent grades ZnO, TiO 2 and SnO 2 : a comparative study","authors":"D. Shinde, P. Tambade, M. Chaskar, Kisan M. Gadave","doi":"10.5194/DWES-10-109-2017","DOIUrl":null,"url":null,"abstract":"Abstract. In this study, we evaluated the photocatalytic activities of analytical reagent (AR) grade ZnO, TiO2, and SnO2 to identify a low-cost photocatalyst for dye degradation. The obtained samples of ZnO, TiO2, and SnO2 were characterised by X-ray diffractogram (XRD), scanning electron microscope imaging, and UV-VIS diffuse reflectance spectroscopy. The decolourisation of three structurally diverse dyes, namely crystal violet, basic blue, and methyl red under solar irradiation, was used to evaluate the photocatalytic activities of three metal oxides. The photocatalytic activities of the received three metal oxides were tested with the photocatalytic degradation of dyes and compared with Degussa P-25. Dye solutions with each metal oxide at initial pH 9 were subjected to irradiation under sunlight and monitored for up to the stage of complete decolourisation. The results indicate that ZnO exhibited the highest photocatalytic activity as compared to TiO2 and SnO2 as well as that of Degussa P-25 (TiO2). The photocatalytic dye decolourisation rates with ZnO were 1.14–1.35, 1.70–3.1, and 4–8.5 times higher than those of the Degussa P-25, TiO2, and SnO2, respectively. The percentage COD removal was studied for ZnO and partial removal was observed at the decolourisation stage. To enhance photocatalytic activity of AR grade ZnO, it was loaded with Ag metal and about 20 % enhancement in the activity was observed.","PeriodicalId":53581,"journal":{"name":"Drinking Water Engineering and Science","volume":"10 1","pages":"109-117"},"PeriodicalIF":0.0000,"publicationDate":"2017-11-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"83","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Drinking Water Engineering and Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.5194/DWES-10-109-2017","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 83

Abstract

Abstract. In this study, we evaluated the photocatalytic activities of analytical reagent (AR) grade ZnO, TiO2, and SnO2 to identify a low-cost photocatalyst for dye degradation. The obtained samples of ZnO, TiO2, and SnO2 were characterised by X-ray diffractogram (XRD), scanning electron microscope imaging, and UV-VIS diffuse reflectance spectroscopy. The decolourisation of three structurally diverse dyes, namely crystal violet, basic blue, and methyl red under solar irradiation, was used to evaluate the photocatalytic activities of three metal oxides. The photocatalytic activities of the received three metal oxides were tested with the photocatalytic degradation of dyes and compared with Degussa P-25. Dye solutions with each metal oxide at initial pH 9 were subjected to irradiation under sunlight and monitored for up to the stage of complete decolourisation. The results indicate that ZnO exhibited the highest photocatalytic activity as compared to TiO2 and SnO2 as well as that of Degussa P-25 (TiO2). The photocatalytic dye decolourisation rates with ZnO were 1.14–1.35, 1.70–3.1, and 4–8.5 times higher than those of the Degussa P-25, TiO2, and SnO2, respectively. The percentage COD removal was studied for ZnO and partial removal was observed at the decolourisation stage. To enhance photocatalytic activity of AR grade ZnO, it was loaded with Ag metal and about 20 % enhancement in the activity was observed.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
氧化锌、二氧化钛和二氧化钛分析试剂光催化降解水中染料的比较研究
摘要在这项研究中,我们评估了分析试剂(AR)级ZnO, TiO2和SnO2的光催化活性,以确定一种低成本的染料降解光催化剂。采用x射线衍射仪(XRD)、扫描电镜成像和UV-VIS漫反射光谱对ZnO、TiO2和SnO2样品进行了表征。采用晶体紫、碱性蓝和甲基红三种结构不同的染料在太阳照射下的脱色方法,评价了三种金属氧化物的光催化活性。用光催化降解染料的方法测试了所得到的三种金属氧化物的光催化活性,并与德固赛P-25进行了比较。每种金属氧化物初始pH值为9的染料溶液在阳光照射下进行监测,直至完全脱色阶段。结果表明,与TiO2和SnO2以及Degussa P-25 (TiO2)相比,ZnO具有最高的光催化活性。ZnO光催化染料脱色率分别是Degussa P-25、TiO2和SnO2的1.14 ~ 1.35、1.70 ~ 3.1和4 ~ 8.5倍。研究了氧化锌的COD去除率,并在脱色阶段观察到部分去除率。为了提高AR级氧化锌的光催化活性,在氧化锌上添加金属银,其光催化活性提高了约20 %。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Drinking Water Engineering and Science
Drinking Water Engineering and Science Environmental Science-Water Science and Technology
CiteScore
3.90
自引率
0.00%
发文量
3
审稿时长
40 weeks
期刊最新文献
The evaluation of hydraulic reliability indices in water distribution networks under pipe failure conditions Technical note: Graph theory-based heuristics to aid in the implementation of optimized drinking water network sectorization Solar distillation of impure water from four different water sources under the southwestern Nigerian climate Sustainability characteristics of drinking water supply in the Netherlands Preparation of thin-film composite membranes supported with electrospun nanofibers for desalination by forward osmosis
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1