Structure design and optimization of ground moving and pole climbing inspection robot

Abstract

Purpose The purpose of this paper is to demonstrate a multipurpose inspection robot that can both walk on the ground and climb on poles. The structure design, size optimization, kinematics analysis, experiment and arithmetic of the robot are discussed in the paper. Design/methodology/approach The robot consists of three adjustable modules and a two-degree-of-freedom parallel mechanism in tandem, and the wheel-finger mechanism of each module can realize wheel-finger opening and closing for fast movement and obstacle crossing. This paper uses geometric analysis and simulation analysis to derive size optimization, and vector coordinate method to derive kinematics. Finally, the experiment is carried out by simulating the working environment of the robot. Findings The robot can realize ground walking and ground turning through the robot entity prototype experiment on the built working environment and efficiently realize 0°–90° pole climbing by the assemble design, optimization and machining. In addition, the robot can also smoothly complete the state transition process from 0° ground to 90° pole climbing. Furthermore, the robot shows good environmental self-adaptation and can complete daily inspection work. Originality/value The robot can pitch and yaw at a large angle and has six-legged characteristics. It is a multipurpose inspection robot that can walk on the ground and climb on poles. And through structure design, size optimization, kinematics analysis and simulation, the existing robots’ common shortcomings such as poor barrier-crossing ability and poor environmental adaptability are solved.