Role of shear on strength and damage evolution in soda-lime glass under high dynamic pressures

IF 2.6 4区 工程技术 Q2 MECHANICS Journal of Applied Mechanics-Transactions of the Asme Pub Date : 2023-07-25 DOI:10.1115/1.4063031
Vatsa Gandhi, B. Lawlor, C. Kettenbeil, G. Ravichandran
{"title":"Role of shear on strength and damage evolution in soda-lime glass under high dynamic pressures","authors":"Vatsa Gandhi, B. Lawlor, C. Kettenbeil, G. Ravichandran","doi":"10.1115/1.4063031","DOIUrl":null,"url":null,"abstract":"\n Silica glasses, such as soda-lime glass (SLG), have found wide ranging applications in engineering due to their excellent optical properties, high strength, and relatively low cost. In such applications, SLG may be subjected to intense dynamic loading due to high/hyper-velocity impact and therefore necessitates understanding of the dynamic shear strength and kinetics for the development of constitutive models. However, while several investigations have generated Hugoniots for silicate glasses, none appear to have measured shearing resistance at pressures above ∼20 GPa. In this study, the role of pressure and strain rate on the shearing resistance of soda-lime glass is explored using sandwich configuration high pressure-pressure shear plate impact (HP-PSPI) experiments. These experiments are conducted at pressures ranging from 14 − 42 GPa and strain rates of 105 − 106 s−1, and analyzed using finite element simulations incorporating a modified Johnson-Holmquist (JH-2) material model. The yield strength of SLG is observed to decrease as a function of pressure, which is reminiscent of the evolution of shear strength in granular media at high pressures. This observation suggests a probable shear-induced damage progression from intact material to granular matter in SLG at high pressures.","PeriodicalId":54880,"journal":{"name":"Journal of Applied Mechanics-Transactions of the Asme","volume":null,"pages":null},"PeriodicalIF":2.6000,"publicationDate":"2023-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Applied Mechanics-Transactions of the Asme","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1115/1.4063031","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 0

Abstract

Silica glasses, such as soda-lime glass (SLG), have found wide ranging applications in engineering due to their excellent optical properties, high strength, and relatively low cost. In such applications, SLG may be subjected to intense dynamic loading due to high/hyper-velocity impact and therefore necessitates understanding of the dynamic shear strength and kinetics for the development of constitutive models. However, while several investigations have generated Hugoniots for silicate glasses, none appear to have measured shearing resistance at pressures above ∼20 GPa. In this study, the role of pressure and strain rate on the shearing resistance of soda-lime glass is explored using sandwich configuration high pressure-pressure shear plate impact (HP-PSPI) experiments. These experiments are conducted at pressures ranging from 14 − 42 GPa and strain rates of 105 − 106 s−1, and analyzed using finite element simulations incorporating a modified Johnson-Holmquist (JH-2) material model. The yield strength of SLG is observed to decrease as a function of pressure, which is reminiscent of the evolution of shear strength in granular media at high pressures. This observation suggests a probable shear-induced damage progression from intact material to granular matter in SLG at high pressures.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
高动压下剪切对钠钙玻璃强度和损伤演化的影响
硅玻璃,如钠钙玻璃(SLG),由于其优异的光学性能、高强度和相对较低的成本,在工程中得到了广泛的应用。在这样的应用中,由于高速/超高速冲击,SLG可能会受到强烈的动态载荷,因此需要了解动态剪切强度和动力学,以开发本构模型。然而,尽管几项研究已经为硅酸盐玻璃产生了Hugoniot,但似乎没有一项研究在压力高于~20GPa的情况下测量到剪切阻力。本研究采用夹层结构高压剪切板冲击(HP-PSPI)实验,探讨了压力和应变速率对钠钙玻璃抗剪性能的影响。这些实验是在14 − 42GPa和105的应变速率 − 106 s−1,并使用结合改良Johnson Holmquist(JH-2)材料模型的有限元模拟进行分析。观察到SLG的屈服强度随压力而降低,这让人想起高压下颗粒介质中剪切强度的演变。这一观察结果表明,在高压下,SLG中可能存在从完整材料到颗粒物质的剪切诱导损伤过程。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
4.80
自引率
3.80%
发文量
95
审稿时长
5.8 months
期刊介绍: All areas of theoretical and applied mechanics including, but not limited to: Aerodynamics; Aeroelasticity; Biomechanics; Boundary layers; Composite materials; Computational mechanics; Constitutive modeling of materials; Dynamics; Elasticity; Experimental mechanics; Flow and fracture; Heat transport in fluid flows; Hydraulics; Impact; Internal flow; Mechanical properties of materials; Mechanics of shocks; Micromechanics; Nanomechanics; Plasticity; Stress analysis; Structures; Thermodynamics of materials and in flowing fluids; Thermo-mechanics; Turbulence; Vibration; Wave propagation
期刊最新文献
Improved Ballistic Impact Resistance of Nanofibrillar Cellulose Films with Discontinuous Fibrous Bouligand Architecture. FAST OPTIMAL DESIGN OF SHELL-GRADED-INFILL STRUCTURES WITH EXPLICIT BOUNDARY BY A HYBRID MMC-AABH PLUS APPROACH The role of frequency and impedance contrasts in bandgap closing and formation patterns of axially-vibrating phononic crystals Head Injuries Induced by Tennis Ball Impacts: A Computational Study Experimental Validation of Reconstructed Microstructure via Deep Learning in Discontinuous Fiber Platelet Composite
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1